This is the FORCE - The World’s Most Powerful Wheel Blower
This is the one everyone’s been talking about. The patent pending FORCE by Billy Goat offers the best of both worlds – unmatched blowing power and the lightest weight of any leading blower.
As improvements to backpack blowers narrowed the performance gap to their wheeled cousins, manufacturers of wheel blowers did little to improve performance and operation of their products. That’s all now changed.
Conceived through market research and hours of exhaustive computer optimization, the FORCE blower represents a truly revolutionary design. Steel had to go—it is too heavy. Plastic is in—it’s light and it’s plenty durable.
The FORCE weighs up to 17 pounds less than comparably powered steel competitors, it remains the quietest wheel blower, and it is tuned to produce unmatched blowing power (see Product Showcase). What more could you ask for?
Billy Goat has successfully made the wheel blower once again an indispensable tool for the landscape contractor and large property owner. So quit gawking and check out the FORCE at a Billy Goat dealer near you today!
Productivity
Smooth & quiet turbocharged 4-cylinder John Deere PowerTech™ diesel engine delivers exceptional reliability, power, and torque.
Patented vertical-lift boom with cushioned boom cylinders provides exceptional load stability, lift-height, and reach.
Purpose-built for rigorous tasks on steep slopes, sand, and muddy terrain.
Unsurpassed stability, breakout, bucket capacity, tractive effort, and travel speed for best-in-class productivity.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments.
Comfort
Four-roller track frames, unique front idler/roller design, and steel-imbedded rubber tracks deliver a smooth and comfortable ride.
Industry's best visibility includes clear sight lines to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides, rear corners, and directly behind.
Sculpted seat, ergonomically correct armrests, and adjustable foot pedals provide day-long comfort and support.
Smooth and responsive low-effort controls enhance comfort, reduce fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater, defroster and air-conditioner.
Uptime/Service
All-steel rollers and idlers, metal-faced seals and journal bearings, and steel-reinforced rubber tracks make John Deere's easy-clean undercarriage significantly less expensive to operate and maintain.
500-hour engine oil and filter service intervals and large fuel tank mean fewer interruptions.
Instead of daily track adjustments with special tools, track tension is checked every 50 hours and adjusted as needed with a grease gun.
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged doors and easy-to-remove panels provide wide-open access. Daily checkpoints and refueling are convenient and quick.
Productivity
Smooth & quiet turbocharged 5-cylinder John Deere PowerTech™ diesel engine delivers exceptional reliability, power, and torque.
Patented vertical-lift boom with cushioned boom cylinders provides exceptional load stability, lift-height, and reach.
Purpose-built for rigorous tasks on steep slopes, sand, and muddy terrain.
Unsurpassed stability, breakout, bucket capacity, tractive effort, and travel speed for best-in-class productivity.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments.
Comfort
Five-roller track frames, unique front idler/roller design, and steel-imbedded rubber tracks deliver a smooth and comfortable ride.
Industry's best visibility includes clear sight lines to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides, rear corners, and directly behind.
Sculpted seat, ergonomically correct armrests, and adjustable foot pedals provide day-long comfort and support.
Smooth and responsive low-effort controls enhance comfort, reduce fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater, defroster and air-conditioner.
Uptime/Service
All-steel rollers and idlers, metal-faced seals and journal bearings, and steel-reinforced rubber tracks make John Deere's easy-clean undercarriage significantly less expensive to operate and maintain.
500-hour engine oil and filter service intervals and large fuel tank mean fewer interruptions.
Check track tension every 50 hours and adjust as needed with a grease gun.
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged doors and easy-to-remove panels provide wide-open access. Daily checkpoints and refueling are convenient and quick.
Productivity
Unique stereo steering provides unsurpassed maneuverability for tight turns and extra agility in close quarters. Turns tight but articulates less, keeping the center-of-gravity and ballast in-line for superior full-turn tipping load capacity.
Big breakout forces, high dump clearance, and generous lift capacities make the 244J the perfect machine for a wide range of work.
Two-speed hydrostatic drivetrain delivers infinite travel speeds from 0 to 19 mph. Inching pedal further fine-tunes control.
Optional Worksite Pro™ skid-steer-style coupler lets you utilize a wide variety of attachments for a wider range of work.
Comes with standard items others call options -- return-to-dip, quick-couple, and high-travel speed range.
Comfort
Oscillating rear axle and elastic articulation reduces cab tilt as much as 50% for a smoother ride that's easier on both machine and operator.
Highly efficient HVAC system with numerous automotive-type louvers helps keep the view clear and the cab comfortable.
Spacious sound-suppressed cab provides best-in-class visibility and comfort.
Boom and bucket control, FNR, and differential lock are all on the same low-effort lever for convenient single-handed control.
Uptime/Service
Wet-disc brakes in the heavy-duty axles self-adjust and are sealed from moisture and contaminants for long, trouble-free life.
Hydraulically driven fan runs only as needed for efficient cooling, reduced noise, and lower fuel consumption.
Fuel-efficient PowerTech™ Deere diesel runs 500 hours between oil changes. Hydraulic lifters and serpentine belt never need adjustment.
Easy-lift hood and transverse-mounted engine provide convenient ground-level access to daily checkpoints.
Environmental drains and spin-on vertical filters make fluid changes quicker and cleaner.
Debris Loaders
TR Series
Debris loaders are used to pick up large volumes of leaves, thatch, grass clippings and other organic debris from one location and transfer it quickly into a truck or trailer for transport. Designed for small to medium sized jobs, the TR is over three times more efficient than people using rakes and tarps to do the same job.
Model #:
TR1104 - 11HP B&S Intek
TR1304 - 13HP Honda GX
HTR Series
For medium to large jobs with heavy volumes of organic debris or litter, the HTR is up to the task. The “H” in HTR stands for heavy. It shares the same frame and exhaust as our TR, but with significantly more capacity due to a larger housing, thicker impeller and larger diameter hose.
The HTR features all-steel construction and an armor-plated 3/8” steel impeller for bulk reduction and impact resistance. The HTR is perfect for quick processing of large amounts of thatch in the spring, leaves in autumn and litter or debris any time in between.
Model #:
HTR1803V - 18HP B&S Vanguard Twin
DL Series
The new Billy Goat DL Series shreds and moves more debris than any truck loader in its class. The new DL Series has been designed for ease of use with a higher reduction & compaction rate than any competitive models.
Vast amounts of debris can be quickly drawn through an extra large, clear intake hose where our exclusive Debris Reducing Razor™ teeth provide exceptional reduction ratio.
Rugged heavy-gauge steel construction ensures durability. To adjust the exhaust, simply turn the proprietary 360-degree hand crank swivel. Bottom line, the new DL Series offer tremendous productivity and ergonomic benefits not found elsewhere. With the DL Series, your crew will save time…
Making you More Money!
Model #:
DL1800V - 18HP Debris Loader w/ 10" Hose (Electric Start w/out Battery)
DL2500S - 25HP Debris Loader w/ 12" Hose (Electric State w/out Battery)
Think of all the ways you use your various vacuums indoors. Now, isn’t it about time someone manufactured a vacuum for the great OUTdoors? Leaves are so blasé. How about hedge clippings, sweet gum balls, mulch, broken glass, window wells? You get the picture-there are no shortage of ways to use a great vacuum—outdoors.
Billy Goat’s new MultiVac creates the standard by which all outdoor vacuums will now be measured.
We began by listening to what customers wanted: Zipperless bags, easy empty bags, rear wheel drive system, and suction to spare.
The new MultiVac delivers. Billy Goat engineers started with a rear wheel drive and top-fill design. From there they added an adjustable intake, three-speed transmission, a 32-gallon zipperless bag, and a quality Honda engine.
Imagine picking up leaves 29” inches wide as you walk. Better yet, go get a demonstration of the impressive new MultiVac at a Billy Goat dealer near you.
The undisputed heavyweight of industrial vacuums, the VQ Wide Area Vacuum delivers size, power and years of trouble-free quiet operation on hard surfaces or turf. At 33” of nozzle width, the VQ is the most productive pedestrian vacuum available.
Five forward speeds allow the operator to match groundspeed to the terrain and application – a maximum of 5 MPH is possible. The adjustable intake door opens up for items as large as one liter bottles or closes down for small, heavy debris.
The intake nozzle is built to take abuse. The VQ housing and exhaust are also constructed of steel.
To match its overall size and performance, the VQ comes standard with a 10-bushel (352 liter) synthetic felt bag. This improves filtration and increases time between emptying.
Billy Goat’s next generation 27” wide lawn and litter vacuum is ideal for residential and property maintenance and builds on our 40 year legacy of strong suction, simple operation, and reliable design that makes outdoor vacuum clean-up a snap.
Whether it is residential clean-up for your patio, lawn, driveway, walkway, shrubs, beds, decks, pool areas, trees, parking lots, or fence line – Billy Goat’s new KV vac eats and bags all your yard clean-up chores. An optional hose kit helps between shrubs, beds and under decks or utilities.
The new unit features a 5-blade impeller with serrated edges to maximize both suction and debris reduction. Variable height adjustment is at your fingertips for either hard surface or turf work, and all the material is accumulated in a breathable-hard bottom mesh turf bag with an integral dust cover. For convenience, bag zippers have been eliminated in favor of simple to use marine style clasps that open and close easily when emptying debris. Honda or Briggs power combine with 12” smooth tread wheels as well as the optional rear-wheel self propelled for hilly turf applications, make operation simple in any environment.
Put the power of our 40-year proven and leading brand to work today! Gotta get a Goat!
The Scag STHM - Three-Wheel Riding Mower
This Rider Puts Productivity at the Forefront.
The Scag STHM three-wheel rider is an efficiency leader with a durable out-front Advantage deck or Velocity Plus deck design for maximum stability, outstanding maneuverability and superior trimming performance.
The STHM's reliable hydrostatic drive system is more powerful, runs smoother and lasts longer than any commercial hydrostatic transaxle drive on the market today. Controlled by a single foot pedal, two high-powered cast-iron wheel motors work in conjunction with a high-efficiency pump to evenly distribute power to both drive wheels.
This mower features an ultra-low center-of-gravity that gives it incredible hillside stability. The STHM, equipped with an Advantage or Velocity Plus cutter deck, is a serious mowing machine. Ask any STHM owner and they will be happy to tell you about it.
Planetary Drive Auger: Features & Benefits
Models: PA15/PA30
A hydraulic motor drives the auger through a sealed planetary gear reduction.
The heavy-duty, all-gear design gives this unit a long life with minimal maintenance.
The drive is completely sealed, with all moving components running in oil for total lubrication.
Reverse rotation for quick back out when obstructions are encountered.
The hydraulic relief valve protects the unit from damage when the auger hits an immovable object.
Self-plumbing for straight holes in level or sloped terrain.
3-Cylinder Yanmar diesel engine
24 horsepower
Performance
Differential lock increases traction and pulling power
Independent mid and rear PTOs
Hydro transmission provides infinite speed selection without clutching or shifting required for direction changes
Comfort
Power steering
Patented, ergonomic Twin Touch™ two-pedal foot control
Optional cruise control
Engine isolators reduce noise and vibration
High-backed contoured seat is suspended for added operator comfort
Reliability
Auto-bleed fuel system - if tractor runs dry, just refuel and restart
Wet-disk brakes
Safety
Roll-Gard™ ROPS and seat belt ensure operator safety
Operator presence system
Versatility
Limited Category 1 3-point hitch
Optional iMatch™ quick hitch
Optional Quick-Park™ Loader - attaches and detaches in minutes
41.5-hp, 4-cylinder, low-emission diesel engine is designed for outstanding performance, durability and the best operating experience
Performance
Standard power steering makes steering easier and quicker when maneuvering tractor and is especially valuable when mowing around obstacles and using a front loader
Individual pedals allow independent operation of right and left brakes and help make shorter turns. The pedals can be locked together during transport for positive straight-line stops
Standard differential lock can be engaged on-the-go for greater productivity; optional 4-wheel drive is available for extra traction and pulling power
To deliver power to rear implements, the tractor features a continuous live 540-rpm rear power take-off (PTO); this rotating shaft provides power to implements such as rotary cutters, rotary tillers and more
Tractor features an open center hydraulic system; dual hydraulic gear pumps on models with power steering are driven off the engine crankshaft and provide high-capacity output for various hydraulic applications
Equipped with a gear transmission with 9 forward and 3 reverse speeds
Comfort/Convenience
Operator's station is designed for easy entry to/exit from the tractor; left-side step and handrails assist you in getting on and off the tractor
A high-backed seat offers good back support for comfortable operation; seat is adjustable both fore and aft; seat flips forward for protection from the elements
Easy-to-read instrument panel includes tach/hourmeter, electric fuel gauge, oil pressure indicator light, alternator indicator light, coolant temperature gauge, and warning lights
Safety
Seat belt and seat belt holders are standard
Operator presence system (OPS) ensures the engine and transmission will shut down if you leave the seat when the tractor is in motion
PTO presence system ensures the engine, transmission, and PTO will shut down if you leave the seat when the transmission, mid or rear PTO is engaged (unless you are using the stationary PTO switch)
Standard two-post Roll-Gard ROPS roll-over protective structure protects you in the event of a tractor tip-over
286 cc (9.5 hp), overhead valve, single-cylinder, air-cooled, 4-cycle gas engine improves fuel economy
Precision-engineered drive train system optimizes engine power for superior acceleration, hauling, towing and hill climbing capabilities
Unique, durable composite cargo box with convenient molded-in features has 5.0 cu. ft. capacity and holds up to 400 lb.; tailgate is easily opened or removed for added convenience
Stable
Low center of gravity and cargo box centered over rear wheels provide best-in-class stability
Standard high-flotation tires minimize ground compaction to save turf and prevent ruts in soft ground, provide excellent flotation and traction and flex over bumps for a smooth ride
Front, dual-rate, independent coil-over-shock suspension, with three-position adjustable preload; provides maximum ride quality regardless of load
Rear, triple-rate, coil-over-shock suspension, with three-position adjustable preload; provides maximum ride quality regardless of load
Ability to Go Anywhere
Standard rear traction assist locks drive wheels together to drive through areas requiring additional traction
Tight, 19-ft., 9-in. turn clearance circle for excellent maneuverability
Homeowner-friendly compact design fits easily into garages, maneuvers around obstacles in the yard and can be hauled in the bed of most full-size pickup trucks
Easy to Use
Automatic transmission eliminates shifting; 15 mph maximum forward speed
Hinged hood opens easily for headlight maintenance and attachment installation; service access panel under seats allows easy access to engine components
Integrated features like headlights, side-by-side seating, step-through operator's platform, cup holders, hip restraints, glove box, hour meter, fuel sight gauge, 12-volt adapter and professional high-back bucket seats enhance comfort and convenience
22-hp Kohler V-twin, OHV air-cooled engine
10-mph transport speed
Performance
Hydrostatic ground drive with large cast aluminum housings for superior cooling
Seven-gallon fuel tank with standard fuel gauge for all day mowing
Warranty term - 2 years or 300 hours, whichever comes first
7-Iron™ Deep-Deck Mowers
48-inch 7-Iron™ mower deck
The deep deck design creates a powerful vacuuming action to lift the grass and create better airflow
One-piece 7-gauge stamped steel means no weld points to fail
Full floating deck follows ground contours, providing the best groomed appearance
Durability
Cast-iron front caster arms and forks for increased durability
Ribbed cast aluminum spindle housings are designed for strength, enduring performance and reliability; the large surface area and aluminum construction keeps the spindles and all moving parts cool
Comfort and Convenience
The "Turn Key +1" system makes starting the machine as easy as starting a car - just turn the key, release the parking brake and you are ready to mow
The mower parking brake is conveniently located at the front of the mower deck platform; the operator simply uses their foot to set or disengage the parking brake
Deluxe high-back (18-inch) seat with adjustable armrests; no-tools fore-aft seat adjustment with a 4-inch range can be be used by the operator while seated
The innovative, low effort dial height-of-cut adjustment with built-in transport lock allows the operator to precisely set the cut height at 1/4-inch increments
Easily raise or lower the mower deck using foot-assisted deck lift system
Motion-Control Levers
Adjustable motion-control levers can be adjusted to three different height settings and a range of fore-aft settings for increased comfort and more precise control of the machine
Dual-lever, hydraulically dampened operator controls modulate movement of control levers for smoother operation; operator can smoothly and precisely control machine
18.5-hp Briggs & Stratton single-cylinder, air-cooled, full pressure lubricated engine
Performance
Hydro-gear transmission with thick 1-inch axles for greater strength
Caster wheels and caster wheel towers have sealed bearings for long life and easy steering
Offset front caster wheels improve inside corner trim performance and help reduce striping
42-inch Edge™ mower deck with 1/4-inch cut-height increments for excellent cut quality and performance; cut-height adjustment has built-in memory
7-mph ground speed
Durability
Tough 1-1/2-inch x 2-inch frame tubing
Comfort and Convenience
Medium-back (15-inch) seat without armrests; no-tools fore-aft seat adjustment with a 3-inch range can be used by the operator while seated
18 x 8.50-8 drive tires and large 13-inch front caster wheels deliver a smoother ride
Two cup holders and open storage compartment
Motion-Control Levers
Motion-control levers are adjustable to three different height settings and five different fore-aft settings for increased operator comfort
Standard shock absorbers dampen movement on the motion control levers for precise and smooth operation
Serviceability
Commercial-style steel footrest flips up to provide easy access for servicing the mower deck; easy to clean grass off top of mower; provides convenient access to mower drive
Fuel tank is made of translucent material; makes it quick and easy to see how much fuel is in the tank; large fuel-fill opening reduces the chance of spilling fuel
25-hp V-Twin, air-cooled, John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Performance
5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
Foot-operated traction assist locks rear wheels together for increased traction
Low-effort manual steering provides a tight 22-inch turning radius and excellent maneuverability
48-inch Edge™ Xtra Cutting System is designed to provide excellent performance in all conditions and operating modes including side discharge, mulching and material collection
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Built-in rear weight brackets
Front axle is made of nodular cast iron; strong and shock resistant, it will not yield under heavy loads or impact
3/4-in steering spindles provide the durability to mow more acres
Internal wet disk brakes for quick stops and long life
Convenience
Heavy-duty CargO Mount™ attaching points are designed into the tractor for easy attachment of optional equipment
Standard tool tray and cupholder keep tools and beverages within reach
Color-coded controls are conveniently located for easy access
Convenient dash-mounted fuel gauge indicates fuel level
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck-leveling gauge located in the center of the cut-height adjusting knob
Convienent spring-assisted foot lift system to raise and lower the mower deck
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy, uncluttered open platform and fender handles makes getting on and off the tractor easy
MANUFACTURER
MODEL John Deere
LA105 Tractor (2010)
Engine
Power 19.5 hp (14.5 kW)*
*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less. ---
Displacement 30.5 cu in. (500 cc)
Manufacturer Briggs & Stratton
Cylinders One
Type Overhead valves
Oil Drain No tools
Charging System 9 amp regulated
Choke/Speed Control One lever
Fuel Tank Location Rear
Fuel Tank Capacity 2.1 U.S. gallon
Fuel Sight Gauge Yes, front
Transmission
Control In-line
Cruise Control Does not apply
Forward Speed 1.5-5 mph
Reverse Speed 2.3 mph
Chassis
Frame Full-length welded steel
Primer/Paint E-coat/powder
Front Tires 15x6-6
Rear Tires 20x8-8
Front Axle Cast iron
Hood Material JD Loy
Floor Mats Yes
CargO Mount System Yes
Storage Pocket Yes
12 Volt Outlet No
Hourmeter Yes
Service Reminder No
Service Interval Decal Yes
Tool Tray No
Cupholder Yes
Steering
Turning Radius 18 in.
Uncut Circle Radius 25 in. (42-in. mower)
Seat
Seat Back Height 11 in.
Fore-aft Adjustment 5 1/2 in. while seated
Lift System
Mower Cut Height 1-4 in., 13 positions
Cut Height Increments 0.25 in.
Memory Indicator No
Mower
Mower Cutting Width 42 in.
Mower Deck Material .105 in. (12 ga)
Mower Wash Port Yes
Easy-Level Deck Yes
Mower Drive System Manual PTO
Mulch Cover Included No, optional
Mower Attachability
Front Draft Arms Spring pin
Rear Draft Arms Spring pins
Meets ANSI Standard Yes
OPEI Label No
Backup Protection Reverse Implement Option (RIO)
Safety Video Yes
Dimensions
Wheelbase 48.9 in. (124.2 cm)
Overall Length 69.9 in. (177.5 cm)
Overall Width (includ. discharge chute) 52 in. (132 cm)
Height 41 in. (104 cm)
17-hp V-twin, air-cooled John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Performance
3.5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
35-watt headlights designed to provide optimum lighting pattern for mowing and snow removal and improved visibility during evening operation
Tight 16-inch turning radius provides excellent maneuverability and improved mowing performance
Edge™ Xtra Cutting System with 42-inch deck designed to provide excellent performance; converts easily between side discharge, mulching and material collection
Also available with 38-inch Edge™ Xtra mower deck or 42-inch Edge™ mulching mower deck
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Rear hitch plate can support two 42-lb. Quik-Tatch weights; weight bracket is built into the frame
Front axle is made of nodular cast iron
Depressing brake pedal applies internal wet disk brakes (increased durability and longer life) for safe stopping
Heavy-duty electric PTO clutch designed to operate through many on/off cycles before needing adjustment; controlled by a convenient dash-mounted control
Convenience
Heavy-duty CargO Mount™ System (a combination of fender, deck and hitch mounting points) provides convenient and easy installation of rear attachments
Standard tool tray and cupholder keep tools and beverages within reach
A lift-assist spring is available on tractors to minimize lift effort; lift effort can be easily adjusted for optimum performance depending on the equipment used (mower, front blade, etc.)
Color-coded controls are conveniently located for easy access
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck leveling gauge located in the center of the cut-height adjusting knob
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy and uncluttered open platform makes getting on and off the tractor easy
48-inch 7-Iron PRO Deck
54-inch 7-Iron PRO Deck
Power
22 hp Air cooled Kawasaki engine
Heavy-duty ground drive transmission - Integrated hydraulic drive eliminates leak points and provides plenty of power to handle even the toughest cutting jobs
Comfort
Exclusive Turn Key +1 - Starting the machine is as easy as starting a car - Your control levers can be extended out or pulled in as long as the parking brake is engaged - just turn the key and go!
Adjustable motion control levers can be adjusted to three different height settings and multiple fore-aft positions, providing comfortable positions for almost any operator
Convenient controls are grouped together on the right console, providing one central location for key switch, throttle, PTO engagement, height of cut, diagnostics, and hour meter
Engage the parking brake with your left foot rather than a hand brake - it is easy to engage and keeps the operator's hands on the control levers
Durability
Caster wheels and caster wheel towers have greasable bearings for long life and easy steering
Heavy duty I-Cast iron I Beam caster wheel arms support axles are impact resistant for durability on the PRO Z-Trak™ Series
Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping
To eliminate flat caster tires, PRO Z-Trak™ machines are equipped with run flat tires as standard equipment
Serviceability
Flip-up foot platform provides easy access for servicing the mower deck
Fuel gauge makes it quick and easy to see how much fuel is in the tank
Make fewer stops for fuel with the increased fuel tank capacity of 11.5 gallons
Large diameter fuel-fill opening reduces the chance of spilling when adding fuel
Productivity
45 net horsepower turbocharged 4-cylinder Deere diesel certified to EPA interim Tier 4 emissions.
Smooth and quiet turbocharged four-cylinder Deere diesel delivers exceptional reliability, power, and torque.
Radial boom design delivers excellent reach through the "work zone" - for loading pickup trucks, placing pallets and loading hoppers.
Optimal 60/40 weight distribution, low center of gravity, and high ground clearance deliver unsurpassed balance and agility.
Only 5-feet wide for work in confined areas. Or opt for the 7 x 15 tires and 56-inch bucket and pass through even narrower openings.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments
Comfort
Industry's best visibility includes a clear line of sight to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides to the tires, rear corners, and directly behind.
Sculpted seat, ergonomically integrated armrests, and adjustable foot pedals provide day-long comfort and support.
"Newly designed" Smooth and responsive low-effort controls maximize comfort, minimize fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater.
Uptime/Service
500-hour engine oil, 3-micron hydraulic, and 5-micron fuel filters provide extra protection
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged rear door and top hood provide wide-open access. Daily color-coded checkpoints and refueling are convenient and quick.
Key Features
Briggs & Stratton 190 cc engine is manufactured to John Deere standards
MowMentum™ Drive System adjusts ground speed as operator follows
Stamped-steel deck is a rear-discharge design for superior bagging
Discharge-mulch-bag
Durable wheels are made of high-impact plastic
One-lever wheel adjuster quickly changes cut-height from 1.25-in. to 4-in
Conveniently located controls easy to operate
Handlebar is easily adjusted or folded down
Utility Blade : Features & Benefits
The versatility of the Worksite Pro™ Utility Blade provides added productivity for customers. The blade can be used for both snow removal and light dirt work.
The blade features standard hydraulic angling of 30° to the left or the right. The bolt-on, replaceable cutting edge is 12.7 mm (1/2 in.) thick and 152.4 mm (6 in.) tall. The blade is 711.2 mm (28 in.) tall and has the ability to bolt on an extension to give an added 203.2 mm (8 in.) in height. The blade also comes with two adjustable skid shoes as standard equipment.
Rubber cutting edges are available for those customers needing to protect decorative surfaces.
3-Cylinder Yanmar diesel engine
24 horsepower
Differential lock increases traction and pulling power
Performance
Hydrostatic transmission (HST) provides infinite speed selection without clutching or shifting required for direction changes
Independent mid and rear PTO (no clutching) can be engaged or disengaged while machine is stopped or on-the-go
Standard 4-wheel drive
Comfort
Power steering provides optimum performance in all operating conditions, especially when tractor is equipped with a loader
Patented, ergonomic Twin Touch™ two-pedal foot control
Cruise control is standard equipment
High-backed contoured seat is suspended for added operator comfort
Dial in the height of cut with the mid-rockshaft knob
Reliability
Wet-disk brakes
Safety
Roll-Gard™ ROPS and seat belt ensure operator safety
Versatility
Category 1 3-Point Hitch
Optional iMatch™ Quick Hitch
Yanmar 3-cylinder TNV Series diesel engine (meets the EPA emission standards for Tier II emission requirements)
40.5 horsepower
Performance
Standard 4-wheel drive
Independent PTO allows PTO to be engaged and disengaged independent of other transmission operations and at any ground speed
Wet disk brakes provide positive stopping power and long life
Dual Mid Selective Control valve with integrated joystick
Comfort/Convenience
Twin Touch™ HST pedals are ergonomically designed for efficient and effortless transmission control
Adjustable high-back vinyl seat with spring suspension
Power steering provides optimum performance in all operating conditions; especially helpful when tractor is equipped with a loader
i-Match™ Quick-Hitch
Safety
Operator Presence System that will shut the tractor off if the operator leaves the seat while the tractor is in gear
ASAE and OSHA certified Roll-Over Protection Structure
Versatility
Category 1 3-Point Hitch
Differential lock increases traction and pulling power
Productivity
Independent-swing boom, 360-degree rotation allow maximum flexibility and exceptional maneuverability for work in tight spaces.
Standard quick coupler and boom mounted auxiliary hydraulics accommodate a wide variety of buckets and Worksite PRO attachments such as rakes, breakers and augers.
Standard rubber tracks traverse virtually any terrain and are especially useful on paved surfaces.
Exceptional drawbar pull delivers plenty of power for backfilling trenches or transporting material around jobsites.
Comfort
Ergonomic low-effort pilot controls direct an open-center variable displacement hydraulic system for exceptionally smooth, combined-function performance.
Spacious operator station, wide control spacing, foldable pedals, and adjustable seat provide day-long comfort. Optional air-conditioned cab includes a large expanse of tinted glass, bi-fold door and wide entryway.
Easy-to-read systems monitor is positioned within the forward line of sight to provide vital operating information at a glance.
Go from backhoe- to excavator-style controls with just a twist of the control-pattern selector valve that's conveniently located beneath the seat.
Uptime/Service
Fuel-sipping diesel and auto idle help preserve precious fuel. Extended service intervals let you work longer between scheduled maintenance.
Open just two doors to perform all maintenance checks and service. Hydraulic fluid sight gauge and see-through coolant reservoir let you check levels at a glance.
Tungsten-carbide coated surfaces and oil-impregnated boom, arm, and bucket bushings deliver unsurpassed long-term durability.
Steel cores within the rubber tracks resist cracking. Large drive sprockets and idlers provide additional undercarriage durability.
Operator station tilts forward 50-degrees for easier service access to the swing motor, hydraulic control valve, engine starter motor, and alternator.
25-hp Kohler V-twin, OHV air-cooled engine
10-mph transport speed
Performance
Hydrostatic ground drive with large cast aluminum housings for superior cooling
Seven-gallon fuel tank with standard fuel gauge for all day mowing
Warranty term - 2 years or 300 hours, whichever comes first
7-Iron™ Deep-Deck Mowers
54-inch 7-Iron™ mower deck or 60-inch 7-Iron™ mower deck
The deep deck design creates a powerful vacuuming action to lift the grass and create better airflow
One-piece 7-gauge stamped steel means no weld points to fail
Full floating deck follows ground contours, providing the best groomed appearance
Durability
Cast-iron front caster arms and forks for increased durability
Ribbed cast aluminum spindle housings are designed for strength, enduring performance and reliability; the large surface area and aluminum construction keeps the spindles and all moving parts cool
Comfort and Convenience
The "Turn Key +1" system makes starting the machine as easy as starting a car - just turn the key, release the parking brake and you are ready to mow
The mower parking brake is conveniently located at the front of the mower deck platform; the operator simply uses their foot to set or disengage the parking brake
Deluxe high-back (18-inch) seat with adjustable armrests; no-tools fore-aft seat adjustment with a 4-inch range can be be used by the operator while seated
The innovative, low effort dial height-of-cut adjustment with built-in transport lock allows the operator to precisely set the cut height at 1/4-inch increments
Easily raise or lower the mower deck using powered deck lift system
Motion-Control Levers
Adjustable motion-control levers can be adjusted to three different height settings and a range of fore-aft settings for increased comfort and more precise control of the machine
Dual-lever, hydraulically dampened operator controls modulate movement of control levers for smoother operation; operator can smoothly and precisely control machine
Ergonomically-angled motion control levers with special padded grips to provide unmatched comfort
Powered deck lift button and PTO cutoff switch are conveniently located on the motion control levers; easily raise and lower the mower deck or shut off the mower blades at a touch of a button
23-hp Briggs & Stratton V-twin, air-cooled, full pressure lubricated engine
Performance
Hydro-gear transmission with thick 1-inch axles for greater strength
Wheels and caster wheel towers have sealed bearings for long life and easy steering
Offset front caster wheels improve inside corner trim performance and help reduce striping
48-inch Edge™ mower deck with 1/4-inch cut-height increments for excellent cut quality and performance; cut-height adjustment has built-in memory
7-mph ground speed
Durability
Tough 1-1/2-inch x 2-inch frame tubing
Comfort and Convenience
Medium-back (15-inch) seat with armrests; no-tools fore-aft seat adjustment with a 3-inch range can be used by the operator while seated
18 x 9.50-8 drive tires and large 13-inch front caster wheels deliver a smoother ride
Two cup holders and open storage compartment
Motion-Control Levers
Motion-control levers are adjustable to three different height settings and five different fore-aft settings for increased operator comfort
Standard shock absorbers dampen movement on the motion control levers for precise and smooth operation
Serviceability
Steel footrest flips up to provide easy access for servicing the mower deck; easy to clean grass off top of mower; provides convenient access to mower drive
Fuel tank is made of translucent material; makes it quick and easy to see how much fuel is in the tank; large fuel-fill opening reduces the chance of spilling fuel
Standard deck wash out ports make cleaning the underside of the deck easy
26-hp V-Twin, liquid-cooled, John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Performance
5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
Foot-operated traction assist locks rear wheels together for increased traction
Low-effort manual steering provides a tight 22-inch turning radius and excellent maneuverability
54-inch Edge™ Xtra Cutting System is designed to provide excellent performance in all conditions and operating modes including side discharge, mulching and material collection
Heavy-duty all-purpose rear tires for increased traction and ride quality
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Built-in front and rear weight brackets
Front axle is made of nodular cast iron; strong and shock resistant, it will not yield under heavy loads or impact
3/4-in steering spindles provide the durability to mow more acres
Internal wet disk brakes for quick stops and long life
Convenience
Heavy-duty CargO Mount™ attaching points are designed into the tractor for easy attachment of optional equipment
Standard tool tray and cupholder keep tools and beverages within reach
Color-coded controls are conveniently located for easy access
Convenient dash-mounted fuel gauge indicates fuel level
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck-leveling gauge located in the center of the cut-height adjusting knob
Convienent spring-assisted foot lift system to raise and lower the mower deck
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy, uncluttered open platform and fender handles makes getting on and off the tractor easy
17-hp V-twin, air-cooled John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Performance
3.5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
35-watt headlights designed to provide optimum lighting pattern for mowing and snow removal and improved visibility during evening operation
4-wheel-steer (4WS) for unmatched maneuverability and effortless trimming; eliminates or greatly reducing the need to back up when trimming around obstacles
Edge™ Xtra Cutting System with 42-inch deck designed to provide excellent performance; converts easily between side discharge, mulching and material collection
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Rear hitch plate can support two 42-lb. Quik-Tatch weights; requires weight bracket that is purchased separately
Front axle is made of nodular cast iron
Depressing brake pedal applies internal wet disk brakes (increased durability and longer life) for safe stopping
Heavy-duty electric PTO clutch designed to operate through many on/off cycles before needing adjustment; controlled by a convenient dash-mounted control
Convenience
Heavy-duty CargO Mount™ System (a combination of fender, deck and hitch mounting points) provides convenient and easy installation of rear attachments
Standard tool tray and cupholder keep tools and beverages within reach
A lift-assist spring is available on tractors to minimize lift effort; lift effort can be easily adjusted for optimum performance depending on the equipment used (mower, front blade, etc.)
Color-coded controls are conveniently located for easy access
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck leveling gauge located in the center of the cut-height adjusting knob
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
End of sector gear shaft pivot on sealed ball bearings for reduced steering effort and to provide a smooth feel for the life of the tractor
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy and uncluttered open platform makes getting on and off the tractor easy
MANUFACTURER
MODEL John Deere
LA115 Tractor (2010)
Engine
Power 19.5 hp (14.5 kW)*
*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less. ---
Displacement 30.5 cu in. (500 cc)
Manufacturer Briggs & Stratton
Cylinders One
Type Overhead valves
Oil Drain No tools
Charging System 9 amp regulated
Choke/Speed Control One lever
Fuel Tank Location Rear
Fuel Tank Capacity 2.1 U.S. gallon (2.25 U.S. gallon for California model)
Fuel Sight Gauge Yes, front
Transmission
Control Two-pedal foot control
Cruise Control No
Forward Speed 0-5.5 mph
Reverse Speed 0-3.2 mph
Chassis
Frame Full-length welded steel
Primer/Paint E-coat/powder
Front Tires 15x6-6
Rear Tires 20x8-8
Front Axle Cast iron
Hood Material JD Loy
Floor Mats Yes
CargO Mount System Yes
Storage Pocket Yes
12 Volt Outlet No
Hourmeter Yes
Service Reminder No
Service Interval Decal Yes
Tool Tray Yes
Cupholder Yes
Steering
Turning Radius 18 in.
Uncut Circle Radius 25 in. (42-in. mower)
Seat
Seat Back Height 11 in.
Fore-aft Adjustment 5 1/2 in. while seated
Lift system
Mower Cut Height 1-4 in., 13 positions
Cut Height Increments 0.25 in.
Memory Indicator No
Mower
Mower Cutting Width 42 in.
Mower Deck Material .105 in. (12 ga)
Mower Wash Port Yes
Easy-Level Deck Yes
Mower Drive System Manual PTO
Mulch Cover Included No, optional
Mower Attachability
Front Draft Arms Spring pin
Rear Draft Arms Spring pins
Meets ANSI Standard Yes
OPEI Label No
Backup Protection Reverse Implement Option (RIO)
Safety Video Yes
Dimensions
Wheelbase 48.9 in. (124.2 cm)
Overall Length 69.9 in. (177.5 cm)
Overall Width (includ. discharge chute) 52 in. (132 cm)
Height 41 in. (104 cm)
48-inch 7-Iron PRO Deck
48-inch 7-Iron Mulch-on-Demand Deck
54-inch 7-Iron Mulch-on-Demand Deck
54-inch 7-Iron PRO Deck
Power
25 hp Air cooled Kawasaki engine
Heavy-duty ground drive transmission - Integrated hydraulic drive eliminates leak points and provides plenty of power to handle even the toughest cutting jobs
Comfort
Exclusive Turn Key +1 - Starting the machine is as easy as starting a car - Your control levers can be extended out or pulled in as long as the parking brake is engaged - just turn the key and go!
Adjustable motion control levers can be adjusted to three different height settings and multiple fore-aft positions, providing comfortable positions for almost any operator
Convenient controls are grouped together on the right console, providing one central location for key switch, throttle, PTO engagement, height of cut, diagnostics, and hour meter
Engage the parking brake with your left foot rather than a hand brake - it is easy to engage and keeps the operator's hands on the control levers
Durability
Caster wheels and caster wheel towers have greasable bearings for long life and easy steering
Heavy duty I-Cast iron I Beam caster wheel arms support axles are impact resistant for durability on the PRO Z-Trak™ Series
Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping
To eliminate flat caster tires, PRO Z-Trak™ machines are equipped with run flat tires as standard equipment
Serviceability
Flip-up foot platform provides easy access for servicing the mower deck
Fuel gauge makes it quick and easy to see how much fuel is in the tank
Make fewer stops for fuel with the increased fuel tank capacity of 11.5 gallons
Large diameter fuel-fill opening reduces the chance of spilling when adding fuel
Productivity
45 net horsepower turbocharged 4-cylinder Deere diesel certified to EPA interim Tier 4 emissions.
Smooth and quiet turbocharged four-cylinder Deere diesel delivers exceptional reliability, power, and torque.
Radial boom design delivers excellent reach through the "work zone" - for loading pickup trucks, placing pallets and loading hoppers.
Optimal 60/40 weight distribution, low center of gravity, and high ground clearance deliver unsurpassed balance and agility.
Only 5-feet wide for work in confined areas. Or opt for the 7 x 15 tires and 56-inch bucket and pass through even narrower openings.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments
Comfort
Industry's best visibility includes a clear line of sight to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides to the tires, rear corners, and directly behind.
Sculpted seat, ergonomically integrated armrests, and adjustable foot pedals provide day-long comfort and support.
"Newly designed" Smooth and responsive low-effort controls maximize comfort, minimize fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater.
Uptime/Service
500-hour engine oil, 3-micron hydraulic, and 5-micron fuel filters provide extra protection
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged rear door and top hood provide wide-open access. Daily color-coded checkpoints and refueling are convenient and quick.
Reliable/Durable
351 cc (11.1 hp), air-cooled, single cylinder, 4-cycle Kawasaki gasoline engine
16-gauge steel, 10.1 cu ft capacity cargo box hauls up to 500 lb (227 kg)
Towing capacity of 900 lb (408 kg) on level terrain
Rear wet disk brakes provide excellent stopping power and minimal maintenance
Stable
Low center of gravity enhances stability and handling for assurance at higher speeds and on inclines
Ability to Go Anywhere
Rear traction assist locks the rear drive wheels together to push through tough spots
High-flotation tires result in minimal ground impaction
Top speed of 20 mph (32 km/h)
Easy to Use
Best-in-class 25 inch (63.5 cm) cargo box load height allows for easy loading and unloading
Features include mid-back seats, cup holders, 12v outlet, glove box, and fuel gauge
Key Features
Briggs & Stratton 190 cc engine is manufactured to John Deere standards
MowMentum™ Drive System adjusts ground speed as operator follows
Stamped-steel deck is a rear-discharge design for superior bagging
Discharge-mulch-bag
Durable wheels are made of high-impact plastic
One-lever wheel adjuster quickly changes cut-height from 1.25-in. to 4-in
Conveniently located controls easy to operate
Handlebar is easily adjusted or folded down
3-Cylinder Yanmar diesel engine
26.5 horsepower
Differential lock increases traction and pulling power
Performance
Hydrostatic transmission (HST) provides infinite speed selection without clutching or shifting required for direction changes
Independent mid and rear PTOs
Standard 4-wheel drive
Comfort
Power steering provides optimum performance in all operating conditions, especially when tractor is equipped with a loader
Patented, ergonomic Twin Touch™ two-pedal foot control
Cruise control is standard equipment
High-backed contoured seat is suspended for added operator comfort
Reliability
Auto-bleed fuel system - if tractor runs dry, just refuel and restart
Wet-disk brakes
Safety
Roll-Gard™ ROPS and seat belt ensure operator safety
Operator presence system
Versatility
Category 1 3-Point Hitch
Optional iMatch™ Quick Hitch
27-hp, 3-cylinder, large displacement, liquid-cooled TNV Series Yanmar diesel engine provides a high level of reserve power to handle tough jobs
Performance
Standard power steering on 4-wheel drive models makes steering easier and quicker when maneuvering tractor and is especially valuable when mowing around obstacles and using a front loader; power steering is optional on 2-wheel drive models
Individual pedals allow independent operation of right and left brakes; individual brake pedals help make shorter turns; the pedals can be locked together during transport for positive straight-line stops
Standard differential lock can be engaged on-the-go for greater productivity; optional 4-wheel drive is available for extra traction and pulling power
To deliver power to rear implements, the tractor features a continuous live 540-rpm rear power take-off (PTO); this rotating shaft provides power to implements such as rotary cutters, rotary tillers, and more
Tractor features an open center hydraulic system; dual hydraulic gear pumps on models with power steering are driven off the engine crankshaft and provide high-capacity output for various hydraulic applications
Equipped with gear transmission with 8 forward and 2 reverse speeds
Comfort/Convenience
Operator's station is designed for easy entry to/exit from the tractor; left-side step and handrails assist you in getting on and off the tractor
A high-backed seat offers good back support for comfortable operation; seat is adjustable both fore and aft; seat flips forward for protection from the elements
Easy-to-read instrument panel includes tach/hourmeter, electric fuel gauge, oil pressure indicator light, alternator indicator light, coolant temperature gauge, and warning lights
Safety
Seat belt and seat belt holders are standard
Operator presence system (OPS) ensures the engine and transmission will shut down if you leave the seat when the tractor is in motion
PTO presence system ensures the engine, transmission, and PTO will shut down if you leave the seat when the transmission, mid or rear PTO is engaged (unless you are using the stationary PTO switch)
Standard two-post Roll-Gard ROPS roll-over protective structure protects you in the event of a tractor tip-over
Power
4-cylinder John Deere PowerTech™ turbocharged diesel engine
43 horsepower
Increased torque provides more power to get the tough jobs done
Direct injected for better cold weather starting
Common rail fuel system provides more uniform fuel delivery
Engine oil cooler provides more efficient heat rejection
75 amp alternator yields additional electrical capacity for accessories
Performance
Sloped hood for improved visibility
Standard 4-wheel drive
LoadMatch™ feature keeps the tractor from stalling under heavy loads
PowrReverser™ transmission or Twin Touch™ eHydro transmission available
MotionMatch™ feature enables the operator to customize the tractor's responsiveness
Loader ready with a standard dual mid selective control valve and loader joystick
Standard rear PTO; optional mid PTO
Increased hydraulic implement flow
Dual hydraulic pumps ensure a consistent fluid flow for steering and a separate supply to implements
Performance Tracking System allows the key tractor systems and functions to be monitored from the driver's seat
Digital Speedometer
Low fuel warning light
Wide-angle halogen lights provide more light and better light dispersion
Comfort/Convenience
Styling and ergonomic design
i-Match™ quick hitch
Tilt steering allows for easy adjustment and fully raises with a pull of a lever
Automotive-style park brake
Standard High Back Seat
One-piece hood design improves serviceability, there are no sides to have to remove
Safety
Operator Presence System that will shut the tractor off if the operator leaves the seat while the tractor is in gear
ASAE and OSHA certified Roll-Over Protection Structure
Productivity
Zero tail swing, independent-swing boom, 360-degree rotation allow maximum flexibility and exceptional maneuverability for work in tight spaces.
Standard quick coupler and boom mounted auxiliary hydraulics accommodate a wide variety of buckets and Worksite PRO attachments such as rakes, breakers and augers.
Standard rubber tracks traverse virtually any terrain and are especially useful on paved surfaces.
Exceptional drawbar pull delivers plenty of power for backfilling trenches or transporting material around jobsites.
Comfort
Ergonomic low-effort pilot controls direct an open-center variable displacement hydraulic system for exceptionally smooth, combined-function performance.
Spacious operator station, wide control spacing, foldable pedals, and adjustable seat provide day-long comfort. Optional air-conditioned cab includes a large expanse of tinted glass, bi-fold door and wide entryway.
Easy-to-read systems monitor is positioned within the forward line of sight to provide vital operating information at a glance.
Go from backhoe- to excavator-style controls with just a twist of the control-pattern selector valve that's conveniently located beneath the seat.
Uptime/Service
Fuel-sipping diesel and auto idle help preserve precious fuel. Extended service intervals let you work longer between scheduled maintenance.
Open just two doors to perform all maintenance checks and service. Hydraulic fluid sight gauge and see-through coolant reservoir let you check levels at a glance.
Tungsten-carbide coated surfaces and oil-impregnated boom, arm, and bucket bushings deliver unsurpassed long-term durability.
Steel cores within the rubber tracks resist cracking. Large drive sprockets and idlers provide additional undercarriage durability.
Power
23-hp Briggs & Stratton V-Twin, air-cooled engine
Performance
Heavy-duty pump and wheel-motor drive system for extra durability and long life; Kanzaki pump; Parker wheel motors
Caster wheels and caster wheel towers have sealed bearings for long life and easy steering
Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping
48-inch Edge™ mower deck with 1/4-inch cut-height increments for excellent cut quality and performance; cut-height adjustment has built-in memory
54-inch Edge™ mower deck with 1/4-inch cut-height increments for excellent cut quality and performance; cut-height adjustment has built-in memory
8.5-mph ground speed
Durability
Tough 1-1/2-inch x 2-inch frame tubing
Comfort and Convenience
Medium-back (15-inch) seat with adjustable armrests; no-tools fore-aft seat adjustment with a 3-inch range can be be used by the operator while seated
Large 13-inch front caster wheels for a smoother ride; large 22-inch drive tires for better traction and slope performance
Two cup holders and open storage compartment
Motion-Control Levers
Adjustable motion-control levers can be adjusted to three different height settings and five different fore-aft settings for increased comfort and more precise control of the machine
Standard shock absorber for the motion control levers make it easy and comfortable to maneuver; shock absorber modulates movement of control levers for smoother operation; operator can smoothly and precisely control machine
Serviceability
Commercial-style steel footrest flips up to provide easy access for servicing the mower deck; easy to clean grass off top of mower; provides convenient access to mower drive
Fuel tank is made of translucent material; makes it quick and easy to see how much fuel is in the tank; large fuel-fill opening reduces the chance of spilling fuel
25-hp V-Twin, air-cooled, John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Performance
5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
Foot-operated traction assist locks rear wheels together for increased traction
Hydraulic power steering is standard equipment to maximize the benefits of 4-wheel steering that provides maximum maneuverability and an uncut trim radius of only 13 inches (with 54-inch deck)
48- or 54-inch Edge™ Xtra Cutting System is designed to provide excellent performance in all conditions and operating modes including side discharge, mulching and material collection
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Built-in front weight bracket
Front axle is made of nodular cast iron; strong and shock resistant, it will not yield under heavy loads or impact
1-in. steering spindles provide the durability to mow more acres
Internal wet disk brakes for quick stops and long life
Convenience
Heavy-duty CargO Mount™ attaching points are designed into the tractor for easy attachment of optional equipment
Standard tool tray and cupholder keep tools and beverages within reach
Color-coded controls are conveniently located for easy access
Convenient dash-mounted fuel gauge indicates fuel level
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck-leveling gauge located in the center of the cut-height adjusting knob
Hydraulic lift control for mower deck positioned on dash near steering wheel for quick, easy and precise fingertip control
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy, uncluttered open platform and fender handles makes getting on and off the tractor easy
5-position tilt steering wheel for increased operator comfort
MANUFACTURER
MODEL John Deere
LA125 Tractor (2010)
Engine
Power 21 hp (15.7 kW)*
*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less. ---
Displacement 33 cu in. (540 cc)
Manufacturer Briggs & Stratton
Cylinders One
Type Overhead valve
Oil Drain No tools
Charging System 9 amp regulated
Choke/Speed Control One lever
Fuel Tank Location Rear
Fuel Tank Capacity 4 U.S. gallon (2.25 U.S. gallon for California model)
Fuel Sight Gauge Yes, front
Transmission
Control Two-pedal foot control
Cruise Control Yes
Forward Speed 0-5.5 mph
Reverse Speed 0-3.2 mph
Chassis
Frame Full-length welded steel
Primer/Paint E-coat/powder
Front Tires 15x6-6
Rear Tires 20x8-8
Front Axle Cast iron
Hood Material JD Loy
Floor Mats Yes
CargO Mount System Yes
Storage Pocket Yes
12 Volt Outlet No
Hourmeter Yes
Service Reminder No
Service Interval Decal Yes
Tool Tray Yes
Cupholder Yes
Steering
Turning Radius 18 in.
Uncut Circle Radius 25 in. (42-in. mower)
Seat
Seat Back Height 15 in.
Fore-aft Adjustment 5 1/2 in. while seated
Lift system
Mower Cut Height 1-4 in., 13 positions
Cut Height Increments 0.25 in.
Memory Indicator No
Mower
Mower Cutting Width 42 in.
Mower Deck Material .105 in. (12 ga)
Mower Wash Port Yes
Easy-Level Deck Yes
Mower Drive System Manual PTO
Mulch Cover Included No, optional
Mower Attachability
Front Draft Arms Spring pin
Rear Draft Arms Spring pins
Meets ANSI Standard Yes
OPEI Label No
Backup Protection Reverse Implement Option (RIO)
Safety Video Yes
Dimensions
Wheelbase 48.9 in. (124.2 cm)
Overall Length 69.9 in. (177.5 cm)
Overall Width (includ. discharge chute) 52 in. (132 cm)
Height 44 in. (112 cm)
Power
22-hp V-twin, air-cooled John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Performance
3.5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
35-watt headlights designed to provide optimum lighting pattern for mowing and snow removal and improved visibility during evening operation
Tight 16-inch turning radius provides excellent maneuverability and improved mowing performance
Edge™ Xtra Cutting System with 48-inch deck designed to provide excellent performance; converts easily between side discharge, mulching and material collection
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Rear hitch plate can support two 42-lb. Quik-Tatch weights; weight bracket is built into the frame
Front axle is made of nodular cast iron
Depressing brake pedal applies internal wet disk brakes (increased durability and longer life) for safe stopping
Heavy-duty electric PTO clutch designed to operate through many on/off cycles before needing adjustment; controlled by a convenient dash-mounted control
Convenience
Heavy-duty CargO Mount™ System (a combination of fender, deck and hitch mounting points) provides convenient and easy installation of rear attachments
Standard tool tray and cupholder keep tools and beverages within reach
A lift-assist spring is provided on tractors to minimize lift effort; lift effort can be easily adjusted for optimum performance depending on the equipment used (mower, front blade, etc.)
Color-coded controls are conveniently located for easy access
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck leveling gauge located in the center of the cut-height adjusting knob
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
End of sector gear shaft pivot on sealed ball bearings for reduced steering effort and to provide a smooth feel for the life of the tractor
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy and uncluttered open platform makes getting on and off the tractor easy
60-inch 7-Iron PRO Deck
60-inch 7-Iron Mulch-on-Demand Deck
72-inch 7-Iron PRO Deck
Power
27 hp Air cooled Kawasaki engine
Heavy-duty ground drive transmission - Integrated hydraulic drive eliminates leak points and provides plenty of power to handle even the toughest cutting jobs
Comfort
Exclusive Turn Key +1 - Starting the machine is as easy as starting a car - Your control levers can be extended out or pulled in as long as the parking brake is engaged - just turn the key and go!
Adjustable motion control levers can be adjusted to three different height settings and multiple fore-aft positions, providing comfortable positions for almost any operator
Convenient controls are grouped together on the right console, providing one central location for key switch, throttle, PTO engagement, height of cut, diagnostics, and hour meter
Engage the parking brake with your left foot rather than a hand brake - it is easy to engage and keeps the operator's hands on the control levers
Durability
Caster wheels and caster wheel towers have greasable bearings for long life and easy steering
Heavy duty I-Cast iron I Beam caster wheel arms support axles are impact resistant for durability on the PRO Z-Trak™ Series
Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping
To eliminate flat caster tires, PRO Z-Trak™ machines are equipped with run flat tires as standard equipment
Serviceability
Flip-up foot platform provides easy access for servicing the mower deck
Make fewer stops for fuel with the increased fuel tank capacity of 11.5 gallons
Large diameter fuel-fill opening reduces the chance of spilling when adding fuel
Productivity
57 horsepower turbocharged 4-cylinder Deere diesel delivers an impressive 31% torque rise.
Patented vertical-lift boom with cushioned boom cylinders provide exceptional load stability, lift-height, and reach
Unified design optimizes hydraulics, lift capabilities, and pushing force.
Smooth and quiet turbocharged four-cylinder Deere diesel delivers exceptional reliability, power, and torque.
Optimal 60/40 weight distribution, low center of gravity, long wheelbase, and high ground clearance deliver unsurpassed balance and agility.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments
Comfort
Industry's best visibility includes a clear line of sight to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides, rear corners, and directly behind.
Sculpted seat, ergonomically correct armrests, and adjustable foot pedals provide day-long comfort and support.
Smooth and responsive low-effort manual controls maximize comfort, minimize fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater, defroster and air conditioner.
Uptime/Service
500-hour engine oil, 3-micron hydraulic, and 5-micron fuel filters provide extra protection
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged doors and easy-to-remove panels provide wide-open access. Daily checkpoints and refueling are convenient and quick.
Reliable/Durable
401 cc (13 hp), air-cooled, single cylinder, 4-cycle Kawasaki gasoline engine
Front and rear outboard hydraulic disc brakes to deliver maximum stopping capability
16-gauge steel, 11.2 cu ft capacity cargo box hauls up to 600 lb (272 kg)
Towing capacity of 1000 lb (454 kg) on level terrain
Stable
Low center of gravity enhances stability and handling for assurance at higher speeds and on inclines
All-wheel suspension allows for a smooth ride with or without load
Ability to Go Anywhere
Rear traction assist locks the rear drive wheels together to push through tough spots
Top speed of 20 mph (32 km/h)
Easy to Use
Features include high-back seats, cup holders, 12v outlet, glove box, and fuel gauge
Key Features
Briggs & Stratton 190 cc overhead-valve engine is manufactured to John Deere standards
MowMentum™ Drive System adjusts ground speed as operator follows
Stamped-steel deck has proven top-discharge design
Discharge-mulch-bag
Durable wheels are made of high-impact plastic
Individual wheel adjusters give cut-heights from 1.25-in. to 4-in
Conveniently located controls easy to operate
Lockable front caster wheels make turning easy
Handlebar is easily adjusted or folded down
Hydraulic Breaker : Features & Benefits
Five Available Models - Breaker sizes range from 203 to 1356 N•m(150 to 1000 lb-ft) of energy per blow.
True Hydraulic Hammer Operating Cycle - These breakers don't use a high-pressure (350-700 psi) accumulator for power; instead they use a ''gas-assist'' cycle and utilize the hydraulic system for most of the firing power.
Low Recoil - The nitrogen chamber provides significant reduction in breaker recoil. The low-pressure nitrogen charge cushions piston recoil to protect the skid steer and operator from the recoil caused during the ''rebound'' or ''cocking'' stroke.
No Hydraulic Surge - The efficient, fully hydraulic design protects the skid steer hydraulic circuit so that no surge-damping accumulators are required.
Modern, Modular Construction - Breakers offer a powerful punch and dependable performance with only two moving parts.
Simple Field Maintenance - With few seals and no special tools required for repair, these breakers are truly field serviceable and owner repairable.
Slim, Compact Design - For tight trench work or crowded demolition applications, the narrow rectangular shape lets the operator get into tough spots where other breakers can't reach.
High Power-to-Weight Ratio - The precision-ground and plated components of the breakers offer high efficiency and light weight.
31.4 horsepower
Isolated Yanmar TNV diesel engine features lower levels of exhaust and emissions
Standard four-wheel drive axle for extra traction in slick conditions and increased drawbar pull
Standard differential lock with on-the-go-engagement for additional traction whenever it is needed
Performance
Foot-controlled hydrostatic transmission. Twin Touch™ foot controls allow selecting both speed and direction of travel with a touch of the toe. Ideally suited for jobs where productivity is a must, such as loader or mower applications
To deliver power to rear implements, the tractor features a fully independent 540-rpm rear power take-off (PTO); this rotating shaft provides power to implements such as rotary cutters, rotary tillers and more
A 2100-rpm independent mid-pto is also included for conveniently powering a mid-mounted mower or front-mounted equipment
Hydrostatic power steering ensures easy and steady turns; wet-disk brakes give smooth and sure stops
Cruise control is standard equipment
Comfort
Sloping hood design provides improved visibility
Plenty of room for comfortable operation
Step-through operator station makes getting on and off the tractor easy
Fender-mounted handrails, large and easy to grab, assist you when getting on and off the tractor
High-backed contoured seat is suspended for added operator comfort
Operator controls are color-coded for easier identification
Reliability
Auto-bleed fuel system - if tractor runs dry, just refuel and restart
Air intake heater cold starting aid provides quick starts in temperatures down to 0 degrees
Fahrenheit; optional engine coolant heater attachment will assist starting under more extreme conditions
Safety
Roll-Gard™ ROPS rollover protective structure and seat belt are standard equipment to protect you in the event of a tractor tip-over; the ROPS structure meets ASAE, SAE, and OSHA standards
Enhanced operator presence system allows for simpler out-of-seat PTO operation; however, the engine will shut down if you leave the seat when the transmission or mid-PTO is engaged
Versatility
Category 1 3-Point Hitch is standard for quick hookup of 3-point hitch implements
Optional iMatch™ Quick Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches
3-Cylinder Yanmar diesel engine (meets the EPA emission standards for Tier II emission requirements)
29.5 horsepower
Direct injected for better cold weather starting
Performance
eHydro™ transmission with infinite speed selection, no clutching or shifting required
One-piece sloped hood for improved visibility and serviceability
Standard 4-wheel drive
LoadMatch™ feature keeps the tractor from stalling under heavy loads
MotionMatch™ feature enables the operator to customize the tractor's responsiveness
Standard rear PTO; optional mid PTO
Dual hydraulic pumps ensure a consistent fluid flow for steering and a separate supply to implements
Loader ready with a dual mid selective control valve and integrated loader joystick
New Performance Tracking System allows key tractor systems and functions to be monitored from the driver's seat
New digital speedometer
New digital hour meter
New low fuel warning light
Comfort/Convenience
New styling and ergonomic design
New tilt steering
Available iMatch™ quick hitch
New automatic style park brake
Rubber isolated platform minimizes vibration
Comfortable High-Back Seat
Available front quick hitch for quick and easy attachment of front implements
Large easy-to-read dials on instrument panel provide engine RPM, fuel level, and engine temperature at a glance
Backlighting of instrument panel provides excellent nighttime visibility
Safety
Operator presence system that will shut the tractor off if the operator leaves the seat while the tractor is in gear
ASAE and OSHA certified roll-over protective structure
Retractable seatbelt for operator safety
Wide angle halogen lights provide more light and better light dispersion
Power
4-cylinder John Deere PowerTech™ turbocharged diesel engine
48 horsepower
Increased torque provides more power to get the tough jobs done
Direct injected for better cold weather starting
Common rail fuel system provides more uniform fuel delivery
Engine oil cooler provides more efficient heat rejection
75 amp alternator yields additional electrical capacity for accessories
Performance
Sloped hood for improved visibility
Standard 4-wheel drive
LoadMatch™ feature keeps the tractor from stalling under heavy loads
PowrReverser™ transmission or Twin Touch™ eHydro transmission available
MotionMatch™ feature enables the operator to customize the tractor's responsiveness
Loader ready with a standard dual mid selective control valve and loader joystick
Standard rear PTO; optional mid PTO
Increased hydraulic implement flow
Dual hydraulic pumps ensure a consistent fluid flow for steering and a separate supply to implements
Performance Tracking System allows the key tractor systems and functions to be monitored from the driver's seat
Digital Speedometer
Low fuel warning light
Wide-angle halogen lights provide more light and better light dispersion
Operator Station - Open Station
Larger grab handles on each fender make getting on and off of the tractor easy
Tilt steering wheel design provides additional clearance for the operator to enter and exit the tractor
Comfortable High-Back Seat
Performance Tracking System has large easy-to-read dials that provide engine RPM, fuel level, and engine temperature at a glance
Backlighting of instrument panel provides excellent nighttime visibility
Foot platform is rubber mounted and incorporates a rubber mat for operator comfort
Operator Station - ComfortGard™ Cab
ComfortGard Cabs are factory-installed on the tractors
Completely pressurized and sealed to keep cool (or warm) air inside and dust and allergens outside
15,000 BTU heater keeps you comfortable in the worst winter conditions
Extra-large condensers and blowers mean fast, efficient cooling in the summer heat
Exclusive raised head bar allows a clear view of the loader all the way to the top of the lift cycle
Independent testing proves the John Deere cab is 20 percent quieter than a comparable competitive model
Automotive-style comfort provides plenty of leg, elbow and headroom and all controls are within easy reach
Learn more about Cab Tractors
Comfort/Convenience
Styling and ergonomic design
i-Match™ quick hitch
Tilt steering allows for easy adjustment and fully raises with a pull of a lever
Automotive-style park brake
Standard High Back Seat
One-piece hood design improves serviceability, there are no sides to have to remove
Safety
Operator Presence System that will shut the tractor off if the operator leaves the seat while the tractor is in gear
ASAE and OSHA certified Roll-Over Protection Structure
Tractor shown with optional implements.
The Scag halogen light kit is easy to mount, and provides bright white light to illuminate your way. 76 watts total, 38 watts per light. Kits available to fit 2002 and newer Scag zero turn riders.
Productivity
Zero tail swing, independent-swing boom, 360-degree rotation allow maximum flexibility and exceptional maneuverability for work in tight spaces.
Standard quick coupler and boom mounted auxiliary hydraulics accommodate a wide variety of buckets and Worksite PRO attachments such as rakes, breakers and augers.
Standard rubber tracks traverse virtually any terrain and are especially useful on paved surfaces.
Exceptional drawbar pull delivers plenty of power for backfilling trenches or transporting material around jobsites.
Comfort
Ergonomic low-effort pilot controls direct an open-center variable displacement hydraulic system for exceptionally smooth, combined-function performance.
Spacious operator station, wide control spacing, foldable pedals, and adjustable seat provide day-long comfort. Optional air-conditioned cab includes a large expanse of tinted glass, bi-fold door and wide entryway.
Easy-to-read systems monitor is positioned within the forward line of sight to provide vital operating information at a glance.
Go from backhoe- to excavator-style controls with just a twist of the control-pattern selector valve that's conveniently located beneath the seat.
Uptime/Service
Fuel-sipping diesel and auto idle help preserve precious fuel. Extended service intervals let you work longer between scheduled maintenance.
Open just two doors to perform all maintenance checks and service. Hydraulic fluid sight gauge and see-through coolant reservoir let you check levels at a glance.
Tungsten-carbide coated surfaces and oil-impregnated boom, arm, and bucket bushings deliver unsurpassed long-term durability.
Steel cores within the rubber tracks resist cracking. Large drive sprockets and idlers provide additional undercarriage durability.
25 hp-Kawasaki V-Twin, air-cooled engine
Performance
Heavy-duty pump and wheel motor drive system for extra durability and long life; Kanzaki pump; Parker wheel motors
Caster wheels and caster wheel towers have sealed bearings for long life and easy steering
Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping
48-inch Edge™ mower deck with 1/4-inch cut-height increments for excellent cut quality and performance; cut-height adjustment has built-in memory
54-inch Edge™ mower deck with 1/4-inch cut-height increments for excellent cut quality and performance; cut-height adjustment has built-in memory
8.5-mph ground speed
Durability
Tough 1-1/2-inch x 2-inch frame tubing
Comfort and Convenience
High-back (18-inch) seat with adjustable armrests; no-tools fore-aft seat adjustment with a 3-inch range can be be used by the operator while seated
Large 13-inch front caster wheels for a smoother ride; large 22-inch drive tires for better traction and slope performance
Two cup holders and open storage compartment
Motion-Control Levers
Adjustable motion-control levers can be adjusted to three different height settings and five different fore-aft settings for increased comfort and more precise control of the machine
Standard shock absorber for the motion control levers make it easy and comfortable to maneuver; shock absorber modulates movement of control levers for smoother operation; operator can smoothly and precisely control machine
Serviceability
Commercial-style steel footrest flips up to provide easy access for servicing the mower deck; easy to clean grass off top of mower; provides convenient access to mower drive
26-hp V-Twin, liquid-cooled, John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Performance
5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
Foot-operated traction assist locks rear wheels together for increased traction
Power steering provides effortless automotive-like control with a tight 22-inch turning radius and excellent maneuverability
48- or 54-inch Edge™ Xtra Cutting System is designed to provide excellent performance in all conditions and operating modes including side discharge, mulching and material collection
Available rear heavy-duty all-purpose tires for increased traction and ride quality
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Built-in front and rear weight brackets
Front axle is made of nodular cast iron; strong and shock resistant, it will not yield under heavy loads or impact
1-in. steering spindles provide the durability to mow more acres
Internal wet disk brakes for quick stops and long life
Convenience
Heavy-duty CargO Mount™ attaching points are designed into the tractor for easy attachment of optional equipment
Standard tool tray and cupholder keep tools and beverages within reach
Color-coded controls are conveniently located for easy access
Convenient dash-mounted fuel gauge indicates fuel level
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck-leveling gauge located in the center of the cut-height adjusting knob
Hydraulic lift control for mower deck positioned on dash near steering wheel for quick, easy and precise fingertip control
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy, uncluttered open platform and fender handles makes getting on and off the tractor easy
5-position tilt steering wheel for increased operator comfort
MANUFACTURER
MODEL John Deere
LA145 Tractor (2010)
Engine
Power 22 hp (16.4 kW)*
*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less. ---
Displacement 40 cu in. (656 cc)
Manufacturer Briggs & Stratton
Cylinders V-twin
Type Overhead valve
Oil Drain No tools
Charging System 9 amp regulated
Choke/Speed Control One lever
Fuel Tank Location Rear
Fuel Tank Capacity 4 U.S. gallon (2.25 U.S. gallon for California model)
Fuel Sight Gauge Yes, front
Transmission
Control Two-pedal foot control
Cruise Control Yes
Forward Speed 0-5.5 mph
Reverse Speed 0-3.2 mph
Chassis
Frame Full-length welded steel
Primer/Paint E-coat/powder
Front Tires 15x6-6
Rear Tires 20x10-8
Front Axle Cast iron
Hood Material JD Loy
Floor Mats Yes
CargO Mount System Yes
Storage Pocket Yes
12 Volt Outlet No
Hourmeter Yes
Service Reminder No
Service Interval Decal Yes
Tool Tray Yes
Cupholder Yes
Steering
Turning Radius 18 in.
Uncut Circle Radius 20 in. (48-in. mower)
Seat
Seat Back Height 15 in.
Fore-aft Adjustment 5 1/2 in. while seated
Lift system
Mower Cut Height 1-4 in., 13 positions
Cut Height Increments 0.25 in.
Memory Indicator No
Mower
Mower Cutting Width 48 in.
Mower Deck Material .105 in. (12 ga)
Mower Wash Port Yes
Easy-Level Deck Yes
Mower Drive System Electric PTO
Mulch Cover Included No, optional
Mower Attachability
Front Draft Arms Spring pin
Rear Draft Arms Spring pins
Meets ANSI Standard Yes
OPEI Label No
Backup Protection Reverse Implement Option (RIO)
Safety Video Yes
Dimensions
Wheelbase 48.9 in. (124.2 cm)
Overall Length 70 in. (177.8 cm)
Overall Width (includ. discharge chute) 60.3 in. (153 cm)
Height 45.7 in. (116 cm)
22-hp V-twin, air-cooled John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Performance
3.5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
35-watt headlights designed to provide optimum lighting pattern for mowing and snow removal and improved visibility during evening operation
4-wheel-steer (4WS) for unmatched maneuverability and effortless trimming; reduces uncut circle radius from 21 inches to only 9 inches (when compared with 2WS X320); eliminates or greatly reducing the need to back up when trimming around obstacles
Edge™ Xtra Cutting System with 48-inch deck designed to provide excellent performance; converts easily between side discharge, mulching and material collection
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Rear hitch plate can support two 42-lb. Quik-Tatch weights; requires weight bracket that is purchased separately
Front axle is made of nodular cast iron
Depressing brake pedal applies internal wet disk brakes (increased durability and longer life) for safe stopping
Heavy-duty electric PTO clutch designed to operate through many on/off cycles before needing adjustment; controlled by a convenient dash-mounted control
Convenience
Heavy-duty CargO Mount™ System (a combination of fender, deck and hitch mounting points) provides convenient and easy installation of rear attachments
Standard tool tray and cupholder keep tools and beverages within reach
A lift-assist spring is provided on tractors to minimize lift effort; lift effort can be easily adjusted for optimum performance depending on the equipment used (mower, front blade, etc.)
Color-coded controls are conveniently located for easy access
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck leveling gauge located in the center of the cut-height adjusting knob
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
End of sector gear shaft pivot on sealed ball bearings for reduced steering effort and to provide a smooth feel for the life of the tractor
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy and uncluttered open platform makes getting on and off the tractor easy
54-inch 7-Iron PRO Deck
60-inch 7-Iron PRO Deck
Power
26 hp Liquid cooled Kawasaki engine
Heavy-duty ground drive transmission - Integrated hydraulic drive eliminates leak points and provides plenty of power to handle even the toughest cutting jobs
Comfort
Exclusive Turn Key +1 - Starting the machine is as easy as starting a car - Your control levers can be extended out or pulled in as long as the parking brake is engaged - just turn the key and go!
Adjustable motion control levers can be adjusted to three different height settings and multiple fore-aft positions, providing comfortable positions for almost any operator
Convenient controls are grouped together on the right console, providing one central location for key switch, throttle, PTO engagement, height of cut, diagnostics, and hour meter
Engage the parking brake with your left foot rather than a hand brake - it is easy to engage and keeps the operator's hands on the control levers
Durability
Caster wheels and caster wheel towers have greasable bearings for long life and easy steering
Heavy duty I-Cast iron I Beam caster wheel arms support axles are impact resistant for durability on the PRO Z-Trak™ Series
Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping
To eliminate flat caster tires, PRO Z-Trak™ machines are equipped with run flat tires as standard equipment
Serviceability
Flip-up foot platform provides easy access for servicing the mower deck
Fuel gauge makes it quick and easy to see how much fuel is in the tank
Make fewer stops for fuel with the increased fuel tank capacity of 11.5 gallons
Large diameter fuel-fill opening reduces the chance of spilling when adding fuel
Productivity
62 horsepower turbocharged 4-cylinder Deere diesel delivers an impressive 26% torque rise.
Patented vertical-lift boom with cushioned boom cylinders provide exceptional load stability, lift-height, and reach.
Unified design optimizes hydraulics, lift capabilities, and pushing force.
Smooth and quiet turbocharged four-cylinder Deere diesel delivers exceptional reliability, power, and torque.
Optimal 60/40 weight distribution, low center of gravity, long wheelbase, and high ground clearance deliver unsurpassed balance and agility.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments
Comfort
Industry's best visibility includes a clear line of sight to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides, rear corners, and directly behind.
Sculpted seat, ergonomically correct armrests, and adjustable foot pedals provide day-long comfort and support.
Smooth and responsive low-effort manual controls maximize comfort, minimize fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater, defroster and air conditioner.
Uptime/Service
500-hour engine oil, 3-micron hydraulic, and 5-micron fuel filters provide extra protection
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged doors and easy-to-remove panels provide wide-open access. Daily checkpoints and refueling are convenient and quick.
Reliable/Durable
675 cc (19 hp), air-cooled, two cylinder, 4-cycle Kawasaki gasoline engine
Rear wet disk brakes provide excellent stopping power and minimal maintenance
Heavy duty industrial drive chain (#60) and reinforced hitch channel for extreme hauling and towing capability
Towing capacity of 1,400 lb (635 kg) on level terrain
16-gauge steel, 11.2 cu ft capacity cargo box hauls up to 1000 lb (454 kg)
Stable
Low center of gravity enhances stability and handling for assurance at higher speeds and on inclines
Ability to Go Anywhere
Rear wheels provide full-time four-wheel drive for improved traction
Rear traction assist locks the rear drive wheels together to push through tough spots
High-flotation tires result in minimal ground impaction
Top speed of 20 mph (32 km/h)
Easy to Use
Best-in-class 25 inch (63.5 cm) cargo box load height allows for easy loading and unloading
Features include high-back seats, cup holders, 12v outlet, glove box, and fuel gauge
Pick-Up Brooms : Features & Benefits
Available in 183 cm (72-in.) and 213 cm (84-in.) widths.
Features 25-in. diameter brush with 50/50 poly wire brush segments, along with a baffle to hold debris in bucket.
Two (2) caster wheels standard for better balance and stability.
Features bolt adjustment for infinite brush height control.
Optional gutter brush has adjustable flow for varying sweeping conditions and the ability to shut off if not needed.
Power
4-cylinder John Deere PowerTech™ turbocharged diesel engine
60 horsepower
Increased torque provides more power to get the tough jobs done
Direct injected for better cold weather starting
Engine oil cooler provides more efficient heat rejection
75 amp alternator yields additional electrical capacity for accessories
Performance
Sloped hood for improved visibility
Standard 4-wheel drive
LoadMatch™ feature keeps the tractor from stalling under heavy loads
PowrReverser™ transmission or Twin Touch™ eHydro transmission available
eThrottle™ is standard on the 4520 with an eHydro transmission. At the turn of a switch the transmission operates just like a car by electronically linking the engine and transmission together
MotionMatch™ feature enables the operator to customize the tractor's responsiveness
Loader ready with a standard dual mid selective control valve and loader joystick
Standard rear PTO; optional mid PTO
The new 540/540 economy PTO allows you to run at substantially lower engine rpms while maintaining a 540 PTO speed which saves fuel, saves money, and operates quieter
Increased hydraulic implement flow
Dual hydraulic pumps ensure a consistent fluid flow for steering and a separate supply to implements
Performance Tracking System allows the key tractor systems and functions to be monitored from the driver's seat
Digital Speedometer
Low fuel warning light
Wide-angle halogen lights provide more light and better light dispersion
Operator Station - Open Station
Larger grab handles on each fender make getting on and off of the tractor easy
Tilt steering wheel design provides additional clearance for the operator to enter and exit the tractor
Comfortable High-Back Seat
Performance Tracking System has large easy-to-read dials that provide engine RPM, fuel level, and engine temperature at a glance
Backlighting of instrument panel provides excellent nighttime visibility
Foot platform is rubber mounted and incorporates a rubber mat for operator comfort
Operator Station - ComfortGard™ Cab
ComfortGard Cabs are factory-installed on the tractors
Completely pressurized and sealed to keep cool (or warm) air inside and dust and allergens outside
15,000 BTU heater keeps you comfortable in the worst winter conditions
Extra-large condensers and blowers mean fast, efficient cooling in the summer heat
Exclusive raised head bar allows a clear view of the loader all the way to the top of the lift cycle
Independent testing proves the John Deere cab is 20 percent quieter than a comparable competitive model
Automotive-style comfort provides plenty of leg, elbow and headroom and all controls are within easy reach
Learn more about Cab Tractors
Comfort/Convenience
Styling and ergonomic design
i-Match™ quick hitch
Tilt steering allows for easy adjustment and fully raises with a pull of a lever
Automotive-style park brake
Standard High Back Seat
One-piece hood design improves serviceability, there are no sides to have to remove
Safety
Operator Presence System that will shut the tractor off if the operator leaves the seat while the tractor is in gear
ASAE and OSHA certified Roll-Over Protection Structure
Tractor shown with optional implement.
The Scag Mulch Plate is an easy way to mulch. A simple bolt-on plate captures the grass under the cutter deck where it can be mulched into small clippings.
Make it big with our largest compact.
Whether you're ready to take on bigger projects or looking for the right size excavator to fit a job, step up to a 60D. Deere's largest compact excavator, the new 60D is just right for landscaping, underground/utility, or site development work. Like our other compacts, it excels in close quarters and is easy to trailer. But with its powerful dig forces, impressive digging depth, and spacious comfortable cab, this highly capable compact produces and feels more like a small mid-size excavator. And with a rugged interim Tier 4 engine and excellent serviceability, you'll get more done with low downtime and operating cost.
Productivity
Zero tail swing, independent-swing boom, 360-degree rotation allow maximum flexibility and exceptional maneuverability for work in tight spaces.
Standard quick coupler and boom mounted auxiliary hydraulics accommodate a wide variety of buckets and Worksite PRO attachments such as breakers and augers.
Standard rubber tracks traverse virtually any terrain and are especially useful on paved surfaces.
Exceptional drawbar pull delivers plenty of power for backfilling trenches or transporting material around jobsites.
Comfort
Ergonomic low-effort pilot controls direct an open-center variable displacement hydraulic system for exceptionally smooth, combined-function performance.
Spacious operator station, wide control spacing, foldable pedals, and adjustable seat provide day-long comfort. Optional air-conditioned cab includes a large expanse of tinted glass, bi-fold door and wide entryway.
Easy-to-read systems monitor is positioned within the forward line of sight to provide vital operating information at a glance.
Go from backhoe- to excavator-style controls with just a twist of the control-pattern selector valve that's conveniently located beneath the seat.
Uptime/Service
Fuel-sipping diesel and auto idle help preserve precious fuel. Extended service intervals let you work longer between scheduled maintenance.
Open just three doors to perform all maintenance checks and service. Hydraulic fluid sight gauge and see-through coolant reservoir let you check levels at a glance.
Tungsten-carbide coated surfaces and oil-impregnated boom, arm, and bucket bushings deliver unsurpassed long-term durability.
Steel cores within the rubber tracks resist cracking. Large drive sprockets and idlers provide additional undercarriage durability.
25 hp-Kawasaki V-Twin, air-cooled engine
Performance
Heavy-duty pump and wheel motor drive system for extra durability and long life; Kanzaki pump; Parker wheel motors
Caster wheels and caster wheel towers have sealed bearings for long life and easy steering
Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping
62-inch Edge™ mower deck with 1/4-inch cut-height increments for excellent cut quality and performance; cut-height adjustment has built-in memory
9-mph ground speed
Durability
Tough 1-1/2-inch x 2-inch frame tubing
Comfort and Convenience
High-back (21-inch) seat with adjustable armrests; no-tools fore-aft seat adjustment with a 3-inch range can be be used by the operator while seated
Large 13-inch front caster wheels for a smoother ride; large 23 x 10.5-inch drive tires for better traction and slope performance
Two cup holders and open storage compartment
Motion-Control Levers
Adjustable motion-control levers can be adjusted to three different height settings and five different fore-aft settings for increased comfort and more precise control of the machine
Standard shock absorber for the motion control levers make it easy and comfortable to maneuver; shock absorber modulates movement of control levers for smoother operation; operator can smoothly and precisely control machine
Serviceability
Steel footrest flips up to provide easy access for servicing the mower deck; easy to clean grass off top of mower; provides convenient access to mower drive
Standard wash out ports on the deck make cleaning the underside of the deck easy
Power
23-hp V-twin, liquid-cooled John Deere iTorque™ Power System (a combination of engine features that provide more lugging ability, even cooling, and durability) provides exceptional performance and durability to handle commercial applications
Internal hydraulic PTO with multi-disk clutch pack
Soft, smooth clutch engagement
Longer disk life with continuous oil bath
No service required - disks are self-adjusting
Shaft drive output through continuous live transmission PTO; no belts to slip or wear out
Limited Category 1 3-point hitch available for rear-mounted equipment
Durability
Heavy-duty robotically welded frame for the strength to operate a wide variety of equipment
Front Quik-Tatch weight bracket is designed into the frame
Provides a convenient way to add 168 lb. of weight to the front of the tractor using four suitcase weights
Extends ahead of the hood to act as a bumper
Front axle is made of strong, shock resistant nodular cast iron; will not bend or deform, as is possible with steel-fabricated axles
Performance
Large 6-1/2 U.S. gallon capacity fuel tank holds enough fuel for extended operation between refills
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
Power steering and cruise control provides effortless, automotive-like control for reduced operator fatigue, increased maneuverability and productivity
Two-function hydraulic control system allows effortless equipment control
A foot-operated differential lock supplies positive power to both rear drive wheels for increased traction; conveniently located on the left footrest for easy engagement (toe versus heel)
Edge™ Xtra Cutting System designed to provide excellent performance; converts easily between side discharge, mulching and material collection
Available with 48-, 54-, 60-, or 62-inch mower deck; resilient 4-point mounting system; wider gauge wheels; 1/4-inch cut height increments
Optional 60-inch 7-Iron™ mower deck is made of durable 7-gauge steel; 5.5-inches deep design delivers commercial mowing capacity
Optional Power Flow™ material collection system and mulching attachment
Large, automotive-type headlights (37-watt halogen), taillights and back-up lights provide unsurpassed nighttime illumination; easily operated with a single dash-mounted switch
Convenience
Full instrumentation and automotive-type controls are color coded and conveniently located for easy access
One-piece hood opens easily to permit checking and servicing the engine; hood can easily be completely removed without tools
Parking brake control is conveniently located below the key switch on the steering pedestal; depressing master stop brake pedal disengages the PTO and cruise control
Standard toolbox and cupholder keep tools and beverages within reach
Handy 12-volt outlet powers cell phone, CD player or sprayer
Mower deck height-of-cut control locks mower in fully raised position so 3-point hitch equipment can be raised or lowered independently of the mower; provides a mower cut height range from 1 to 5 1/4 inches
Comfort
Comfortable, 15-inch high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing for fine tuning of suspension; folds forward for protection from elements
Six-position tilt steering wheel can be adjusted for optimum operator comfort and makes getting on and off the tractor easy
Non-slip foot pads help isolate the operator's feet from vibration
Fender handles provide a convenient handhold when operating on slopes
Roomy and uncluttered open platform makes getting on and off the tractor easy
617 cc, (20hp) liquid cooled, twin cylinder, 4-cycle Kawasaki gasoline engine provides impressive power
4-bypass carburetor assures easier starting and excellent acceleration in all temperatures
Industry-exclusive hydroformed steel frame provides added strength, rigidity, and durability
Heavy-duty, 16-gauge-steel, 11.3 cu. ft. capacity cargo box hauls up to 1,000 lb.
Payload and towing capacity of 1,400 lb. lets you tackle any task
Two-speed continuously variable transmission allows for optimal towing, hauling, and pulling in low gear up to 12 mph (19 kph) and transport in high gear up to 25 mph (40 kph)
Long lasting hydraulic disc brakes feature a dual-circuit master cylinder and larger calipers for ultimate stopping power
Rugged heavy-duty bumper protects front end of vehicle
Occupant Protection System (OPS) with multiple grab handles and 3-pt. seat belts is SAE ROPS certified
Stable
Best-in-class stability for assurance at higher speeds and on inclines
Low center of gravity enhances stability and handling
Enhanced 4-wheel suspension is tuned to cushion you when carrying a full load or when empty
Smooth Steer Technology reduces steering effort by up to 30 percent, especially in 2WD
Go Anywhere Capability
On-demand, "true" 4-wheel drive gives you total control; select a completely turf friendly mode of operation, or press the switch and get on-demand 4-wheel drive for climbing the toughest trails
Rear traction assist locks the rear drive wheels together to push through tough spots
Standard heavy-duty, all purpose tires are great for most terrain types; optional (aggressive) high-performance, all-terrain tires (shown above) and (turf friendly) turf tires are available to deliver the traction you need
Optional automotive-style, deluxe glass cab and other weather protection accessories for the OPS are available to keep you going in almost any weather condition
MANUFACTURER
MODEL John Deere
LA165 Tractor (2010)
Engine
Power 24 hp (17.9 kW)*
*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less. ---
Displacement 44.2 cu in. (724 cc)
Manufacturer Briggs & Stratton
Cylinders V-twin
Type Overhead valve, Extended Life Series (ELS)
Oil Drain No tools
Charging System 16 amp regulated
Choke/Speed Control One lever
Fuel Tank Location Rear
Fuel Tank Capacity 4 U.S. gallon (2.25 U.S. gallon for California model)
Fuel Sight Gauge Yes, front
Transmission
Control Two-pedal foot control
Cruise Control Yes
Forward Speed 0-5.5 mph
Reverse Speed 0-3.2 mph
Chassis
Frame Full-length welded steel
Primer/Paint E-coat/powder
Front Tires 16x6.5-8
Rear Tires 22x9.5-12
Front Axle Cast iron
Hood Material JD Loy
Floor Mats Yes
CargO Mount System Yes
Storage Pocket Yes
12 Volt Outlet Yes
Hourmeter Yes
Service Reminder No
Service Interval Decal Yes
Tool Tray Yes
Cupholder Yes
Steering
Turning Radius 18 in.
Uncut Circle Radius 20 in. (48-in. mower)
Seat
Seat Back Height 15 in. w/lumbar adjustment
Fore-aft Adjustment 5 1/2 in. while seated
Lift system
Mower Cut Height 1-4 in., 13 positions
Cut Height Increments 0.25 in.
Memory Indicator No
Mower
Mower Cutting Width 48 in.
Mower Deck Material .105 in. (12 ga)
Mower Wash Port Yes
Easy-Level Deck Yes
Mower Drive System Electric PTO
Mulch Cover Included No, optional
Mower Attachability
Front Draft Arms Spring pin
Rear Draft Arms Spring pins
Meets ANSI Standard Yes
OPEI Label No
Backup Protection Reverse Implement Option (RIO)
Safety Video Yes
Dimensions
Wheelbase 48.9 in. (124.2 cm)
Overall Length 75.3 in. (191.2 cm)
Overall Width (includ. discharge chute) 60.3 in. (153 cm)
Height 46.8 in. (119 cm)
25-hp V-twin, air-cooled John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Solenoid shift starter ensures easy starts, even in cold weather
Performance
3.5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
35-watt headlights designed to provide optimum lighting pattern for mowing and snow removal and improved visibility during evening operation
Tight 16-inch turning radius provides excellent maneuverability and improved mowing performance
Edge™ Xtra Cutting System with 54-inch deck designed to provide excellent performance; converts easily between side discharge, mulching and material collection
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Rear hitch plate can support two 42-lb. Quik-Tatch weights; weight bracket is built into the frame
Front axle is made of nodular cast iron
Depressing brake pedal applies internal wet disk brakes (increased durability and longer life) for safe stopping
Heavy-duty electric PTO clutch designed to operate through many on/off cycles before needing adjustment; controlled by a convenient dash-mounted control
Convenience
Heavy-duty CargO Mount™ System (a combination of fender, deck and hitch mounting points) provides convenient and easy installation of rear attachments
Standard tool tray and cupholder keep tools and beverages within reach
Color-coded controls are conveniently located for easy access
A lift-assist spring is provided on tractors to minimize lift effort; lift effort can be easily adjusted for optimum performance depending on the equipment used (mower, front blade, etc.)
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck leveling gauge located in the center of the cut-height adjusting knob
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
End of sector gear shaft pivot on sealed ball bearings for reduced steering effort and to provide a smooth feel for the life of the tractor
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy and uncluttered open platform makes getting on and off the tractor easy
72-inch 7-Iron PRO Deck
Power
31 hp Air cooled Kawasaki engine
Heavy-duty ground drive transmission - Integrated hydraulic drive eliminates leak points and provides plenty of power to handle even the toughest cutting jobs
Comfort
Exclusive Turn Key +1 - Starting the machine is as easy as starting a car - Your control levers can be extended out or pulled in as long as the parking brake is engaged - just turn the key and go!
Adjustable motion control levers can be adjusted to three different height settings and multiple fore-aft positions, providing comfortable positions for almost any operator
Convenient controls are grouped together on the right console, providing one central location for key switch, throttle, PTO engagement, height of cut, diagnostics, and hour meter
Engage the parking brake with your left foot rather than a hand brake - it is easy to engage and keeps the operator's hands on the control levers
Durability
Caster wheels and caster wheel towers have greasable bearings for long life and easy steering
Heavy duty I-Cast iron I Beam caster wheel arms support axles are impact resistant for durability on the PRO Z-Trak™ Series
Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping
To eliminate flat caster tires, PRO Z-Trak™ machines are equipped with run flat tires as standard equipment
Serviceability
Flip-up foot platform provides easy access for servicing the mower deck
Fuel gauge makes it quick and easy to see how much fuel is in the tank
Make fewer stops for fuel with the increased fuel tank capacity of 11.5 gallons
Large diameter fuel-fill opening reduces the chance of spilling when adding fuel
Productivity
70 horsepower turbocharged 5-cylinder Deere diesel delivers an impressive 35% torque rise.
Patented vertical-lift boom with cushioned boom cylinders provide exceptional load stability, lift-height, and reach.
Unified design optimizes hydraulics, lift capabilities, and pushing force.
Smooth and quiet turbocharged five-cylinder Deere diesel delivers exceptional reliability, power, and torque.
Optimal 60/40 weight distribution, low center of gravity, long wheelbase, and high ground clearance deliver unsurpassed balance and agility.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments
Comfort
Industry's best visibility includes a clear line of sight to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides, rear corners, and directly behind.
Sculpted seat, ergonomically correct armrests, and adjustable foot pedals provide day-long comfort and support.
Smooth and responsive low-effort manual controls maximize comfort, minimize fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater, defroster and air conditioner.
Uptime/Service
500-hour engine oil, 3-micron hydraulic, and 5-micron fuel filters provide extra protection
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged doors and easy-to-remove panels provide wide-open access. Daily checkpoints and refueling are convenient and quick.
Scrap Grapples : Features & Benefits
Each grapple has all pivot points that are greaseable, hardened 1-in. pins and hardened cylinder rods.
Features 2 independent-action grapples that allow different-sized objects in each grapple.
Saves man-hours when picking up loose scrap and odd-shaped materials.
The grapples open wide to allow the operator to pick up objects that will not fit in ordinary buckets.
Real time-saver for foundries, scrap yards, or any industry where loose scrap is moved or handled.
3-Cylinder Yanmar diesel engine (meets the EPA emission standards for Tier II emission requirements)
32.5 horsepower
Direct injected for better cold weather starting
Performance
PowrReverser™ transmission with 12 forward and 12 reverse speeds is standard
eHydro™ transmission with infinite speed selection, no clutching or shifting required is optional
One-piece sloped hood for improved visibility and serviceability
Standard 4-wheel drive
LoadMatch™ feature keeps the tractor from stalling under heavy loads
MotionMatch™ feature enables the operator to customize the tractor's responsiveness
Standard rear PTO; optional mid PTO
Dual hydraulic pumps ensure a consistent fluid flow for steering and a separate supply to implements
Loader ready with a dual mid selective control valve and integrated loader joystick
Performance Tracking System allows key tractor systems and functions to be monitored from the driver's seat
Digital speedometer
Digital hour meter
Low fuel warning light
Operator Station - Open Station
Larger grab handles on each fender make getting on and off of the tractor easy
Tilt steering wheel design provides additional clearance for the operator to enter and exit the tractor
Comfortable High-Back Seat
Performance Tracking System has large easy-to-read dials that provide engine RPM, fuel level, and engine temperature at a glance
Backlighting of instrument panel provides excellent nighttime visibility
Foot platform is rubber mounted and incorporates a rubber mat for operator comfort
Operator Station - ComfortGard™ Cab
ComfortGard Cabs are factory-installed on the tractors
Completely pressurized and sealed to keep cool (or warm) air inside and dust and allergens outside
15,000 BTU heater keeps you comfortable in the worst winter conditions
Extra-large condensers and blowers mean fast, efficient cooling in the summer heat
Exclusive raised head bar allows a clear view of the loader all the way to the top of the lift cycle
Independent testing proves the John Deere cab is 20 percent quieter than a comparable competitive model
Automotive-style comfort provides plenty of leg, elbow and headroom and all controls are within easy reach
Comfort/Convenience
Ergonomic design
Tilt steering
Available iMatch™ quick hitch
Automatic style park brake
Rubber isolated platform minimizes vibration
Available front quick hitch for quick and easy attachment of front implements
Safety
Operator presence system that will shut the tractor off if the operator leaves the seat while the tractor is in gear
ASAE and OSHA certified roll-over protective structure
Retractable seatbelt for operator safety
Wide angle halogen lights provide more light and better light dispersion
Pull a trailer with the optional hitch! Haul landscape supplies, pull behind attachments or handheld equipment right to the job site. Make yourself more productive by reducing the number of trips back and forth to the truck. Take it with you! (250 lb. capacity)
MANUFACTURER
MODEL John Deere
LA175 Tractor (2010)
Engine
Power 26 hp (19.4 kW)*
*Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less. ---
Displacement 44.2 cu in. (724 cc)
Manufacturer Briggs & Stratton
Cylinders V-twin
Type Overhead valve, Extended Life Series (ELS)
Oil Drain No tools
Charging System 16 amp regulated
Choke/Speed Control One lever
Fuel Tank Location Rear
Fuel Tank Capacity 4 U.S. gallon (2.25 U.S. gallon for California model)
Fuel Sight Gauge Yes, front
Transmission
Control Two-pedal foot control
Cruise Control Yes
Forward Speed 0-5.5 mph
Reverse Speed 0-3.2 mph
Chassis
Frame Full-length welded steel
Primer/Paint E-coat/powder
Front Tires 16x6.5-8
Rear Tires 22x9.5-12
Front Axle Cast iron
Hood Material JD Loy
Floor Mats Yes
CargO Mount System Yes
Storage Pocket Yes
12 Volt Outlet Yes
Hourmeter Yes
Service Reminder No
Service Interval Decal Yes
Tool Tray Yes
Cupholder Yes
Steering
Turning Radius 18 in.
Uncut Circle Radius 18 in. (54-in. mower)
Seat
Seat Back Height 15 in. w/lumbar adjustment
Fore-aft Adjustment 5 1/2 in. while seated
Lift system
Mower Cut Height 1-4 in., 13 positions
Cut Height Increments 0.25 in.
Memory Indicator No
Mower
Mower Cutting Width 54 in.
Mower Deck Material .120 in. (11 ga)
Mower Wash Port Yes
Easy-Level Deck Yes
Mower Drive System Electric PTO
Mulch Cover Included No
Mower Attachability
Front Draft Arms Spring pin
Rear Draft Arms Spring pins
Meets ANSI Standard Yes
OPEI Label No
Backup Protection Reverse Implement Option (RIO)
Safety Video Yes
Dimensions
Wheelbase 48.9 in. (124.2 cm)
Overall Length 75.3 in. (191.2 cm)
Overall Width (includ. discharge chute) 67 in. (170 cm)
Height 46.8 in. (119 cm)
22-hp V-twin, air-cooled John Deere iTorque™ Power System (which provides more lugging ability, full pressure lubrication, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation.
Performance
Hydraulic power steering with tilt is standard for effortless automotive-like steering control and great maneuverability
Tight 22-in. turning radius for excellent trimming performance
3.5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
35-watt headlights designed to provide optimum lighting pattern for mowing and snow removal and improved visibility during evening operation
Edge™ Xtra Cutting System with 48-inch deck designed to provide excellent performance; converts easily between side discharge, mulching and material collection
Durability
Heavy-duty welded frame for the strength to operate a wide variety of equipment
Rear hitch plate can support two 42-lb. Quik-Tatch weights; weight bracket is built into the frame
Front axle is made of nodular cast iron
Depressing brake pedal applies internal wet disk brakes (increased durability and longer life) for safe stopping
Heavy-duty electric PTO clutch designed to operate through many on/off cycles before needing adjustment; controlled by a convenient dash-mounted control
Convenience
Hydraulic power lift is standard and delivers easy and precise fingertip control of mower deck, front blade, or snow attachments
Heavy-duty CargO Mount™ System (a combination of fender, deck and hitch mounting points) provides convenient and easy installation of rear attachments
Standard tool tray and cupholder keep tools and beverages within reach
Color-coded controls are conveniently located for easy access
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck leveling gauge located in the center of the cut-height adjusting knob
Comfort
Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
End of sector gear shaft pivot on sealed ball bearings for reduced steering effort and to provide a smooth feel for the life of the tractor
Full-length foot mats provide comfort for the operator while protecting the footrest area
Roomy and uncluttered open platform makes getting on and off the tractor easy
Productivity
76 horsepower turbocharged 5-cylinder Deere diesel delivers an impressive 35% torque rise.
Patented vertical-lift boom with cushioned boom cylinders provide exceptional load stability, lift-height, and reach.
Unified design optimizes hydraulics, lift capabilities, and pushing force.
Smooth and quiet turbocharged five-cylinder Deere diesel delivers exceptional reliability, power, and torque.
Optimal 60/40 weight distribution, low center of gravity, long wheelbase, and high ground clearance deliver unsurpassed balance and agility.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments
Comfort
Industry's best visibility includes a clear line of sight to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides, rear corners, and directly behind.
Sculpted seat, ergonomically correct armrests, and adjustable foot pedals provide day-long comfort and support.
Smooth and responsive low-effort manual controls maximize comfort, minimize fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater, defroster and air conditioner.
Uptime/Service
500-hour engine oil, 3-micron hydraulic, and 5-micron fuel filters provide extra protection
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged doors and easy-to-remove panels provide wide-open access. Daily checkpoints and refueling are convenient and quick.
John Deere offers both pin style and rail style Worksite Pro™ Pallet Forks in two lengths: 42- and 48-in. Both styles offer a step on each side of the pallet fork frame for easy entry into and exit from the skid steer.
The pin style pallet forks allow the forks to ''float'' with the contour of the ground. The pin style features an unlimited number of tine positions, a robust single-piece backrest, and unrestricted visibility to the fork tips.
The rail style pallet forks hold the forks in a rigid position. The forks stay fixed in the set position at all times. The rail style features a robust single-piece backrest and unrestricted visibility to the fork tips. Forks can be located 203–1016 mm (8–40-in.) wide with 102 mm (4-in.) increments, offering eight positions.
The 620i 4x4 is available in 2 color schemes: John Deere Green & Yellow or Olive & Black
Reliable/Durable
617cc (23 hp) liquid cooled, twin cylinder, 4-cycle Kawasaki gas engine has more horsepower for incredible power through any terrain
Electronic Fuel Injection (EFI) on all gas models (620i) for superior throttle response and power; provides instant starting in all types of weather
30 mph top speed (17 mph in low range) allows you to be more efficient, herd livestock, or cover a field faster
Increased acceleration for improved performance
Optional Speed Limiter™ kit allows full power and acceleration with keyed lockout to limit top speed to 20 mph
Advanced clutching with a tighter belt provides increased acceleration, smoother at low speeds, and efficient engine braking to assist descending down hills
Standard Occupant Protection System (OPS) with a passenger-side hand-hold and 3-point seat belts is SAE and OSHA ROPS-certified, providing rugged "off-road" looks and protection
1,000 lb. cargo box capacity, 1,300 lb. towing and 1,400 lb. payload capacity ensures you can tackle any task
Two-range CVT transmission for superior low-speed pulling and towing ability
Long lasting front and rear hydraulic service brakes with mechanical rear park brake provide an automotive-style brake system with a dual circuit for the greatest reliability and a smoother-feeling engagement
Hydroformed frame for unmatched strength and durability
Engineered plastic (JDLOY) can be painted and provides improved scratch and marring resistance/recoverability
Standard bumper protects the vehicle
Stable
Independent Rear Suspension (IRS) provides excellent ride quality and superior terrain capability
7-inch suspension travel soaks up bumps and terrain while maintaining traction through any condition
11-inch ground clearance for greater access over obstacles on the trail and superior terrain capability
Larger styled wheels (12 inches) and tires (25 inches) for greater ground clearance and sporty good looks
Go Anywhere Capability
Standard full-clutch enclosure on all gas models provides greater access through water up to 22 inches high
On-demand, "true" 4-wheel drive gives you total control; select a completely turf friendly mode of operation, or press the switch and get on-demand 4-wheel drive for climbing the toughest trails
Rear traction assist locks the rear drive wheels together to push through tough spots
Improved steering further reduces steering effort for assured predictability
Choice of Aggressive Tread Tires (AT489) or All-Purpose (All Trail II) Tread Tires
Optional automotive-style, deluxe glass cab and other weather protection accessories for the OPS are available to keep you going in almost any weather condition
Easy To Use
Standard integrated 2-inch rear receiver hitch
Attractive styling with integrated features such as cup holders, 12-volt outlet, glove box, storage compartment, and fuel gauge
With controls resembling those of an automobile, AutoHST makes getting work done as easy as taking a drive in the country.
Power
3-Cylinder Yanmar diesel engine (meets the EPA emission standards for Tier II emission requirements)
37 horsepower
Direct injected for better cold weather starting
Turbocharged for added power and performance
Performance
PowrReverser™ transmission with 12 forward and 12 reverse speeds is standard
eHydro™ transmission with infinite speed selection, no clutching or shifting required is optional
One-piece sloped hood for improved visibility and serviceability
Standard 4-wheel drive
LoadMatch™ feature keeps the tractor from stalling under heavy loads
MotionMatch™ feature enables the operator to customize the tractor's responsiveness
Standard rear PTO; optional mid PTO
Dual hydraulic pumps ensure a consistent fluid flow for steering and a separate supply to implements
Loader ready with a dual mid selective control valve and integrated loader joystick
Performance Tracking System allows key tractor systems and functions to be monitored from the driver's seat
Digital speedometer
Digital hour meter
Low fuel warning light
Operator Station - Open Station
Larger grab handles on each fender make getting on and off of the tractor easy
Tilt steering wheel design provides additional clearance for the operator to enter and exit the tractor
Comfortable High-Back Seat
Performance Tracking System has large easy-to-read dials that provide engine RPM, fuel level, and engine temperature at a glance
Backlighting of instrument panel provides excellent nighttime visibility
Foot platform is rubber mounted and incorporates a rubber mat for operator comfort
Operator Station - ComfortGard™ Cab
ComfortGard Cabs are factory-installed on the tractors
Completely pressurized and sealed to keep cool (or warm) air inside and dust and allergens outside
15,000 BTU heater keeps you comfortable in the worst winter conditions
Extra-large condensers and blowers mean fast, efficient cooling in the summer heat
Exclusive raised head bar allows a clear view of the loader all the way to the top of the lift cycle
Independent testing proves the John Deere cab is 20 percent quieter than a comparable competitive model
Automotive-style comfort provides plenty of leg, elbow and headroom and all controls are within easy reach
Learn more about Cab Tractors
Comfort/Convenience
Ergonomic design
Tilt steering
Available iMatch™ quick hitch
Automatic style park brake
Rubber isolated platform minimizes vibration
Available front quick hitch for quick and easy attachment of front implements
Safety
Operator presence system that will shut the tractor off if the operator leaves the seat while the tractor is in gear
ASAE and OSHA certified roll-over protective structure
Retractable seatbelt for operator safety
Wide angle halogen lights provide more light and better light dispersion
Power
4-cylinder John Deere PowerTech™ turbocharged diesel engine
66 horsepower
Increased torque provides more power to get the tough jobs done
Direct injected for better cold weather starting
Engine oil cooler provides more efficient heat rejection
75 amp alternator yields additional electrical capacity for accessories
Performance
Sloped hood for improved visibility
Standard 4-wheel drive
LoadMatch™ feature keeps the tractor from stalling under heavy loads
Twin Touch™ eHydro transmission
eThrottle™ is standard on the 4720 with an eHydro transmission. At the turn of a switch the transmission operates just like a car by electronically linking the engine and transmission together
MotionMatch™ feature enables the operator to customize the tractor's responsiveness
Loader ready with a standard dual mid selective control valve and loader joystick
Standard rear PTO; optional mid PTO
The new 540/540 economy PTO allows you to run at substantially lower engine rpms while maintaining a 540 PTO speed which saves fuel, saves money, and operates quieter
Increased hydraulic implement flow
Dual hydraulic pumps ensure a consistent fluid flow for steering and a separate supply to implements
Performance Tracking System allows the key tractor systems and functions to be monitored from the driver's seat
Digital Speedometer
Low fuel warning light
Wide-angle halogen lights provide more light and better light dispersion
Operator Station - Open Station
Larger grab handles on each fender make getting on and off of the tractor easy
Tilt steering wheel design provides additional clearance for the operator to enter and exit the tractor
Comfortable High-Back Seat
Performance Tracking System has large easy-to-read dials that provide engine RPM, fuel level, and engine temperature at a glance
Backlighting of instrument panel provides excellent nighttime visibility
Foot platform is rubber mounted and incorporates a rubber mat for operator comfort
Operator Station - ComfortGard™ Cab
ComfortGard Cabs are factory-installed on the tractors
Completely pressurized and sealed to keep cool (or warm) air inside and dust and allergens outside
15,000 BTU heater keeps you comfortable in the worst winter conditions
Extra-large condensers and blowers mean fast, efficient cooling in the summer heat
Exclusive raised head bar allows a clear view of the loader all the way to the top of the lift cycle
Independent testing proves the John Deere cab is 20 percent quieter than a comparable competitive model
Automotive-style comfort provides plenty of leg, elbow and headroom and all controls are within easy reach
Comfort/Convenience
Styling and ergonomic design
i-Match™ quick hitch
Tilt steering allows for easy adjustment and fully raises with a pull of a lever
Automotive-style park brake
Standard High Back Seat
One-piece hood design improves serviceability, there are no sides to have to remove
Safety
Operator Presence System that will shut the tractor off if the operator leaves the seat while the tractor is in gear
ASAE and OSHA certified Roll-Over Protection Structure
Tractor shown with optional implements.
Productivity
85 horsepower turbocharged 5-cylinder Deere diesel delivers a whopping 47% torque rise.
Patented vertical-lift boom with cushioned boom cylinders provide exceptional load stability, lift-height, and reach.
Unified design optimizes hydraulics, lift capabilities, and pushing force.
Smooth and quiet turbocharged five-cylinder Deere diesel delivers exceptional reliability, power, and torque.
Optimal 60/40 weight distribution, low center of gravity, long wheel base, and high ground clearance deliver unsurpassed balance and agility.
Large standard tires, best-in-class axle torque, and impressive bucket breakout help heap the bucket fuller and faster.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments
Comfort
Industry's best visibility includes a clear line of sight to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides, rear corners, and directly behind.
Sculpted seat, ergonomically correct armrests, and adjustable foot pedals provide day-long comfort and support.
Smooth and responsive low-effort manual controls maximize comfort, minimize fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater, defroster and air conditioner.
Uptime/Service
500-hour engine oil, 3-micron hydraulic, and 5-micron fuel filters provide extra protection
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged doors and easy-to-remove panels provide wide-open access. Daily checkpoints and refueling are convenient and quick.
Productivity
85 horsepower turbocharged 5-cylinder Deere diesel delivers a whopping 47% torque rise.
Patented vertical-lift boom with cushioned boom cylinders provide exceptional load stability, lift-height, and reach.
Unified design optimizes hydraulics, lift capabilities, and pushing force.
Smooth and quiet turbocharged five-cylinder Deere diesel delivers exceptional reliability, power, and torque.
Optimal 60/40 weight distribution, low center of gravity, long wheel base, and high ground clearance deliver unsurpassed balance and agility.
Large standard tires, best-in-class axle torque, and impressive bucket breakout help heap the bucket fuller and faster.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments
Comfort
Industry's best visibility includes a clear line of sight to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides, rear corners, and directly behind.
Sculpted seat, ergonomically correct armrests, and adjustable foot pedals provide day-long comfort and support.
Smooth and responsive low-effort manual controls maximize comfort, minimize fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater, defroster and air conditioner.
Uptime/Service
500-hour engine oil, 3-micron hydraulic, and 5-micron fuel filters provide extra protection
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged doors and easy-to-remove panels provide wide-open access. Daily checkpoints and refueling are convenient and quick.
The Worksite Pro™ Power Rake line is the ideal skid steer tool for landscaping, seedbed preparation, rock raking and picking, site development, and more. The opportunities are limitless.
Power Rakes : Features & Benefits
The PR84B is an addition to the Worksite Pro™ line up.
Bi-Angular Construction - When activated by a 12-volt electric solenoid, the power rake roller assembly can rotate 20° from center in either direction, allowing material to be moved left or right.
Bidirectional - Exclusive forward and backward raking capability. An adjustable twin barrier bar allows the customer to gather stones and debris in either direction for a perfectly screened seedbed.
Adjustable End Plates - Allow the power rake to perform like a box scraper, trapping and gathering stones for piling and pickup.
Toothed Roller - Carbide hard teeth are welded onto the roller to aid digging, lifting, and pulverizing dirt.
Oil Bath Drive - Completely enclosed drive system. The heavy-duty drive chain is housed in a sealed oil bath to reduce maintenance.
AutoHST
With controls resembling those of an automobile, AutoHST makes getting work done as easy as taking a drive in the country.
Power
3-Cylinder Yanmar diesel engine (meets the EPA emission standards for Tier II emission requirements)
44 horsepower
Direct injected for better cold weather starting
Turbocharged for added power and performance
Equipped with intercooler
Performance
eHydro™ transmission with infinite speed selection, no clutching or shifting required
One-piece sloped hood for improved visibility and serviceability
Standard 4-wheel drive
LoadMatch™ feature keeps the tractor from stalling under heavy loads
MotionMatch™ feature enables the operator to customize the tractor's responsiveness
Standard rear PTO; optional mid PTO
Dual hydraulic pumps ensure a consistent fluid flow for steering and a separate supply to implements
Loader ready with a dual mid selective control valve and integrated loader joystick
Performance Tracking System allows key tractor systems and functions to be monitored from the driver's seat
Digital speedometer
Digital hour meter
Low fuel warning light
Operator Station - Open Station
Larger grab handles on each fender make getting on and off of the tractor easy
Tilt steering wheel design provides additional clearance for the operator to enter and exit the tractor
Comfortable High-Back Seat
Performance Tracking System has large easy-to-read dials that provide engine RPM, fuel level, and engine temperature at a glance
Backlighting of instrument panel provides excellent nighttime visibility
Foot platform is rubber mounted and incorporates a rubber mat for operator comfort
Operator Station - ComfortGard™ Cab
ComfortGard Cabs are factory-installed on the tractors
Completely pressurized and sealed to keep cool (or warm) air inside and dust and allergens outside
15,000 BTU heater keeps you comfortable in the worst winter conditions
Extra-large condensers and blowers mean fast, efficient cooling in the summer heat
Exclusive raised head bar allows a clear view of the loader all the way to the top of the lift cycle
Independent testing proves the John Deere cab is 20 percent quieter than a comparable competitive model
Automotive-style comfort provides plenty of leg, elbow and headroom and all controls are within easy reach
Learn more about Cab Tractors
Comfort/Convenience
Ergonomic design
Tilt steering
Available iMatch™ quick hitch
Automatic style park brake
Rubber isolated platform minimizes vibration
Available front quick hitch for quick and easy attachment of front implements
Safety
Operator presence system that will shut the tractor off if the operator leaves the seat while the tractor is in gear
ASAE and OSHA certified roll-over protective structure
Retractable seatbelt for operator safety
Wide angle halogen lights provide more light and better light dispersion
The patented Tiger Stripe Lawn Striping System is the ultimate way to enhance the striping ability of your Turf Tiger. The Tiger Striper has unique features that allow you to turn the stripe on and off, and remove the entire roller system without tools. It is spring-loaded so it applies downward pressure onto the grass. This further enhances the stripe and allows the roller to contour to uneven terrain better than standard fixed rollers.
The Turf Tiger bumper provides additional protection against trailer damage and damage from foreign objects. Please note: The bumper can not be used in conjunction with Scag grass collection systems.
Steel Tracks : Features & Benefits
Improves flotation and traction in soft, muddy, loose conditions, hard ground, and gravel.
Increases operator comfort in rough conditions.
Adds counterbalance weight.
Improves tire protection in tire-damaging conditions and increases tread life.
Reduces ground pressure.
Heavy-duty bushings for long wear life [32 mm (1.25-in.) diameter].
Drilled, not cored, link holes for increased strength.
Outer side plate is open for easy cleaning and length adjustment.
Sloped casting under the link between the ears helps eject material that could interfere with link movement.
This torsion spring suspension seat provides the ultimate in operator comfort. The side bolsters and lumbar region of the seat provide the occupant with additional support when riding over uneven terrain. A full 60mm of travel is available in the suspension system. **Standard on 2005 and newer Turf Tiger models with diesel or 29hp and larger gas engines; optional on 27hp models and 2004 and previous models.
Trenchers : Features & Benefits
Three models available: 36-, 48-, and 60-in. (914-, 1219-, and 1524-mm.).
Heavy-duty direct drive system eliminates chain reduction.
Manual side shift for trenching close to structures.
Maintenance-free, double-sealed nose wheel bearings.
Built-in skid shoe provides proper auger depth control.
Spring-loaded boom reduces shock loads on the hydraulic motor and skid steer.
Easy access into and out of the skid steer.
Replaceable spoil auger mounds most spoil to one side of trench.
Axle design for added strength. Heavy-duty wheel motor.
Indicators for proper digging control.
Heavy-duty crumber standard to assist with loose soil removal.
